Randy, thanks for responding! You are spot on, that is a picture from a 1933 V12 sitting at the ACD Factory.
 
Let me start by saying I think my 33 is a bit of a Frankenstein so nothing would surprise me 🙂 It is a Salon and I believe it to be an 8-105 and has been re-bodied as a boat tail. It has hydraulic brakes and the thing that seems unusual is it has bolt on wire wheels.
 
I snapped that pictures becasue it is the only one that I have seen that has a similar ball type fitting on the axle as my car has. I am not sure if the ball style fitting is correct for my car and I assume that ball stud could be removed and replaced with the same style fitting my 31. I am new to Auburns so any guidance is appreciated.
 
This is what our 33 Salaon axle looks like, not sure which shock it should have or that will work.
http://505hp.com/wp-content/uploads/2012/04/20160615_161929-1024x576.jpg
 
This is what is on our 31.
http://505hp.com/wp-content/uploads/2012/04/20160615_161952-1024x576.jpg
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
