As an example of what a completed car will look like.....(this car is not for sale):
 
My Dad completed one car, his car. He called it the 814, as what the factory had intended to name the car for 1938. Had they survived.
 
Based on all of my research, talking with Felix DeGeyter (the Auburn-Cord-Duesenberg Co parts manager in Broken Arrow OK), etc, quite thoroughly, Dad's car was the very first full sized reproduction of a Cord 810/812 Phaeton convertible ever completed. Others were started, and about 8 were built by a company based in Florida, but Dad's was the very first.
 
My Dad's goal in buying the molds was to produce full-sized reproduction Cords, market and sell them as the 814. That car is pictured in the brochure pictures shown below. It appeared in GQ magazine, an Italian magazine, and, I believe 2 or 3 others that I can't recall. We have photos of the GQ article, and pictures used in the Italian magazine article.
 
His car is built on a complete 1974 Corvette chassis and driveline (chassis, suspension, brakes, engine, transmission, driveline, etc). Construction started on 11 July 1977, and the running, driving, and mostly completed car exited the shop under it's own power on 3 Sept 1977 - 3 months. The grill is an original 1936 Cord grill, originally a non-supercharged version that was modified to look like the SC grill - it's metal, not fiberglass. The complete headlight assemblies - headlights, buckets, hand cranks, cables, etc, are all original 1936 810 parts, as is the rear convertible window frame and associated glass. The bumpers were bought from Stan Gilliland, and his Auburn Cord Part Company in Wellington, KS - they are not originals.
 
We have a photo album that documents the entire build.
 
The car was built in Fairfield NJ, at what was called Wayne Municipal Airport (it's since changed names, and is now called Essex County Airport) in a hangar at the airport. I used to go to the shop to help my Dad work on the Cord, and would walk out towards the runway to watch planes take off and land.
 
Basically, they drove a used 1974 Corvette into the shop, removed the body, cut and lengthened the chassis 27 or so inches (Corvette is 98", Cord 810 Phaeton is 125"), fitted the body to the chassis, and performed all the rest of the many, many necessary items to make it a complete car. For the most part, the images you see of his 814 is exactly how it rolled out of the shop, but with age taking it's toll. It is missing the rear quarter windows, and a windshield has to be fitted, chromed, and installed (it's in the back seat area of the car). The windshield and quarter windows shown in the various marketing images were borrowed units from someone in NJ, then returned a several years later. In late 1979/1980, he drove his 814 to CA with the intent of building more cars, and selling them. That never happened, but he drove the car around CA for a few years before putting it in storage.
 
Shortly after the car was completed, we towed it to the ACD meet in Auburn for it's debut. I vividly recall the trip there and back as a child - we towed it with our 1978 Mercury Grand Marquis station wagon....wood paneling and all.
 
By the way - while digging around on the internet, we found this eBay ad for two of his old brochures. We have approximately 6-8 in the build binder.
 
We were SHOCKED to find these on eBay. The seller is unsure how they obtained the brochures.
 
The images below were taken 23 Oct 2015. His 814 is pretty sad, but it's damn near EXACTLY as it was built in 1977:
 
http://www.shrackracing.com/for-sale/814-molds/814-1.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-2.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-3.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-4.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-5.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-6.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-7.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-8.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-9.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-10.jpg
 
The taller gentleman pictured below is Gordon Buehrig. The shorter person in the blue leisure suit is my father.
 
http://www.shrackracing.com/for-sale/814-molds/814-11.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-12.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-13.jpg
 
http://www.shrackracing.com/for-sale/814-molds/814-14.jpg
 
$25,000 for all of the molds and body parts listed, NOT my Dad's 814, or best reasonable offer. These are historic items.
 
Transportation is the responsibility of the buyer.
 
PM here, or email http://www.shrackracing.com/email.jpg
And away it all goes to Dayton OH.....
 
http://www.shrackracing.com/for-sale/sold1.jpg
 
http://www.shrackracing.com/for-sale/sold2.jpg
 
SOLD
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
