SECTION 1: DOOR CARDSHere is my almost finished door card. It has been built from scratch as my car had no door cards when bought...it was an unfinished car. You will see that I matched the design of the original door cards, which was difficult to do, particularly the raised sections and the edges. There are a few differences to the original but itÔÇÖs really quite close. I see lots of awful interiors in replicas, and a number of pretty bad redone interiors in original carÔÇÖs. I hope you like these. I have yet to fit the interior door handle Regards Jerome
To add a little more authenticity put "T" nails in the corners. Not sure how you would attach them though, without wood.
CORDiallyMike
Mike
Mike. I certainly considered these ÔÇ£TÔÇØ nails which go into the outer edge of the door in the top corners but decided not to do so for two reasons...
1) I donÔÇÖt know where to buy them....do you? As it is your suggestion, maybe you do know where to buy them. If so, IÔÇÖd love to know.
2) they are a nails, and as you say, how do you fix that into fiberglass. The original carÔÇÖs have a wood frame so that is possible to nail them into the corners.
For the benefit of other members reading this, I am attaching a photo of these ÔÇ£TÔÇØ nails on an original car. I do this because I would like to have this forum document useful reference info for members restoring their carÔÇÖs, rather than referring to things that perhaps others may not be aware of.
Thanks Mike for the reference to ÔÇ£TÔÇØ nails as I had forgotten to highlight that is a feature of the original carÔÇÖs....albeit small.
Regards Jerome
Curt
Thanks for your reply and contributing to the discussion. IÔÇÖm not surprised Salmon was not an original color of leather from the factory. I personally think it looks great on that particular car, as it contrasts well to the sage colored paint....and was clearly an owners choice.
1) Can you tell us what were the original leather colors from the factory?
2) re the differing features I have highlighted in several door card photos (eg 1: the shape of the 3 lines, do they have a hard or soft turn on original carÔÇÖs etc), as a very experienced ACD member and expert, what is your view on what is original.
Regards Jerome
Thanks for info on leather colors. I greatly appreciate you taking the time to respond given your extensive expertise. That gives us all a guide as to the original broad palette of colors....but as we all know, colors vary tremendously. For example, as you can see in earlier pictures my car has been done in a leather color called ÔÇ£WineÔÇØ and is essentially a burgundy color. Is that red? Does that match the original factory color or is it way off.....who knows?
 
Does any person in the ACD club, to your knowledge have definitive expertise on interiors. Presumably our ACD club has judges of authenticity ....because it is hard to judge a concours without knowing the facts. That being said, I have owned very rare Rolls Royce and Bentley motor cars, and I know for a fact that the expertise in concours judging does not exist in many of the various clubs....particularly in interiors.
 
Now I have an Elegant Motors Speedster replica, so obviously that car doesnÔÇÖt count in terms of originality. ItÔÇÖs a very well built replica, but It will never be in an ACD concours. IÔÇÖm just trying to produce a car thatÔÇÖs sympathetic to the original.....in a sense it pays homage. So I guess IÔÇÖm suggesting that the best we Replica car owners can do is produce an interior that makes us individually happy, but is sympathetic to the original. If we understand the original features, we can make reasoned judgements over departures from the original.
Regards Jerome
Curt
ThatÔÇÖs marvelous! Thanks so much for either digging out the photo, or, going to the effort of making a new photo of an original interior....brilliant. I think this photo proves the 3 decorative lines at the top of the panel DO match the curve of the top of the door, AND they DO have a hard edge at the point they turn. It also shows the top line of the flap does broadly match the shape of the top of the door, but it is still fairly straight. ItÔÇÖs interesting that the top of the flap appears to be sewn down onto the panel with a brass fixing point on either end. I have not yet seen this on any car out there today (IÔÇÖd say almost all cars have been redone without this feature).
Lastly, the red color Appears to be a darkish shade but it is not as dark as my wine/burgundy color.
 
Curt....thanks so much for getting that photo. This is very helpful to recording originality. Well done!
Regards Jerome
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.












