I was curious so I measured my orig. 35 speedster and also got 42". I am 6ft. 3inches and don't seem to have the trouble you do.
CORDiallyMike
My trousers inseam is 34 inches.
My daily driver, a 2015 VW Eos, has gas pedal to back of seat distance of 48 inches.
I buy my cars to drive, often on 200 to 300 mlle trips in one day. I don't want a modern, comfortable, drive, but I do want to be able to avoid accidents.
I must apologize if you thought I was being critical. It was not meant in that way. I also drive a bit.
CORDiallyMike
Hi Mike
I see you drive a BIT
Just how many miles have you put on your original speedster?
Pete
More than 55,000 since 2007. The pleasure far surpasses any fit constraints. To bad we don't get any attention.
CORDiallyMike
I own an Elegant Motors Speedster replica and IÔÇÖm 6 ft 1ÔÇØ. I am able to completely stretch my left leg so itÔÇÖs straight to the firewall, so itÔÇÖs quite comfortable. I think the biggest issues to ensure comfort are ensuring that your seat design is pretty compact (not too thick) and itÔÇÖs placement on the floor is in the optimal position. You can thin the back of the seat, if it has springs rather than just foam, by compressing the springs a little with tie downs. You can also sometimes reposition the seat a little further back and make the back slightly more vertical to squeeze a bit more room. The other issue is pedal placement. IÔÇÖve seen lots of replicas put huge pedals in poorly fitted places. This leaves too little room for the left leg to stretch out, or not at all. It isnÔÇÖt that difficult to pull out the pedals and refabricate so that they feel right. IÔÇÖve done this exact same thing on my car and it makes a huge difference to the drive ability of the car.
 
Hope these suggestions help. Of course you can refabricate the body, but thatÔÇÖs a huge project in my opinion, and something I personally would never contemplate.
I just picked up an Elegant Motors speedster in Florida. Drove it about 100 miles to Sanford, Florida where I put it on the Amtrak Auto auto train. About a 2:15 drive. Left leg cannot stretch out without being right under the brake pedal. Right knee must be bent almost 90 degrees to use the gas pedal
 
Worse was the 250 mile ride home from Lorton, Virginia to Pennsylvania. Had to stop a number of times to work the cramps out.
As others have pointed out, pedal design and placement is terrible if you are tall. (Seller of this car is about 5'6". This will be the first thing I will have to work on.
 
Nevertheless, looking forward to lots of summer and fall drives!
Greg. Congratulations on your purchase of an Elegant Motors Speedster. ItÔÇÖs a shame you were not able to stop by my place in Charlotte NC on the way home from Florida as we could compare cars, since I also own an Elegant Motors Car. I have adjusted my pedal placement in my car to great effect.
Anyway, I will send you a private message so you can contact me anytime. IÔÇÖd love to help wherever I can. IÔÇÖd also be interested in detailed photos of your car
Regards Jerome
I'm 190cm tall and feel sitting too high in my Glenn Pray Boattail Speedster. 
 
Jack
I think the secret to a good seating position is to have a seat that is relatively thin on the base and the back. Also, ensure you dont have a seat adjustment mechanism as they always add additional height.my seat is fixed to the floor as far back as it goes. Lastly, having the rear part of the base of the seat lower than the front part (of the base of the seat) encourages your backside to rest furthest back in the seat.
I considered all these things when modifying my seat for my speedster. IÔÇÖm 6 foot 1 inch and feel very comfortable and not too high
But Mike what happened to the hair?
Tom
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
