Because the website indicates you are a User rather than a n ACD Club member I am appending a Private Message I composed to you , which you probably can't access.
If I were you I would speak with Felix DeGeyter at Auburn Cord Duesenberg Compay at Broken Arrow , Oklahoma where the Glenn Pray machines were originally conceived and built. Felix was Glenn's right hand man and is very knowledgeable on this subject. Felix's E-mail is felixdegeyter@yahoo.com and his cell phone is (918) 812-4070. Good luck in your search . Jonathan Richards #1080 @ Chesterfield, MO / My cell Phone is Area 712/621-1854
OOPS ! I held my Ctrl V keys down too long. Excuse the repetition of my message to User Gregb1954,
Jonathan Richards
There are a few on eBay right now. Give me a call' date=' I am in the directory.[/quote'] 
It's great to know that we have various contacts to ask from. I might give this a try as well. 🙂
Jivanty. Regarding various Speedsters available, I think itÔÇÖs difficult to definitively say one builder is better than others. Personal preference will guide your choice to a large extent, along with build quality and any budgetary considerations you may have. Under Personal Preferences you can consider....
1) Design differences of one speedster vs another and decide whatÔÇÖs important to you.
A) MECHANICALS: choose either a modern fuel injected engine and 4 speed transmission or whether you are happy to have an older style engine with 3 speed transmission. Of course you can buy a car with older mechanicals and upgrade to something more modern if you are up for a project
😎 BODY FEATURES: choose from a regular 2 seater style (most common) or a 4 seater style (harder to find). Decide if you like a certain number of exhausts exiting the hood area. Glenn Pray proponents appear to get excited about the fact that the stainless exhausts in those cars contain real exhaust pipes (similar to the original Auburn) whereas most other manufacturers have non functional stainless exhausts. I donÔÇÖt really care about that feature, but rather it always annoys me to see later 2nd gen Glenn Pray cars with only 2 exhausts exiting the hood area, versus the original cars which had 4 exhausts. I think 2 exhausts looks really weird. Most other manufacturers have 4 exhausts, but 4 on each side of the car. The original Auburn only has 4 exhausts exiting the driver side of the car. I like the balance of 4 exhausts on each side, so it doesnÔÇÖt worry me. Another feature on Glenn Pray cars that I personally donÔÇÖt like is the additional body panel that sits next to the rear wheel arches. It accommodates the higher chassis rail design that Pray engineered around the rear wheels. No other manufacturer used this approach to my knowledge, and it is in my opinion a significant negative design departure by Pray compared to the original Gordon Buehrig design of the Auburn Speedster. It is the principal reason I have chosen not to have a late model Glenn Pray car. That being said, they are still great cars. In fact GlennÔÇÖs very rare early replicas used a number of original Auburn parts....but are very rare, and very hard to find. The majority of a Glenn Pray cars are the later standard design my comments reflect.
Another major difference in body features concerns how the hood operates. An original Auburn Speedster has two hood leaves, and it pivots in the Centre. Some replicas have a single large hood which does not pivot in the Centre (like the Pray carÔÇÖs) but rather on the side of the car. I like it pivoting in the Centre. It makes the body look more authentic to me.
Another Body difference concerns how the convertible top flap looks. Some replicas have these that are too large in my opinion, and differ from the original.
Another body design feature which differs concerns the fuel cap style and location. The original car has a fuel cap on the passenger side, near to the rear passenger side tail light. Some replicas have them located on the wrong side (driver side) while others have them incorrectly located on the vertical surface of the rear Boattail section.
There are other differences, but this note is getting too long. At some point I plan to write an article showing the differences between the various manufacturers when compared to the original.
Anyway, I chose an Elegant Motors speedster. I like their design and attention to detail.
Hope this helps. Regards Jerome
PS: Here's a link to get you on the waiting list for the Generation 3. They were featured on American Pickers recently.
https://www.acdfactory.com/g3superchargedauburnspeedster.html
The black and silver car was on eBay about 12 years ago I missed it by a grand
It sold for around 30 (not running) and went to France.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


