You could use the new laser rust remover and make the reapairs so much easier on yourself. The laser in harmless to skinn but sure removes rust quickly. The louver repairs are simple too. As a retired machinist and welder I used to TIG weld reapirs on stationary steam turbine diaphragm blades. We would make a copper backing plate under the missing or cut back blades. Then start a TIG weld bead using Inconel rod. We actually "made" the replacement blade as we continued to add another bead of weld. On your metal material you probably can use plain carbon steel TIG rod. We used Inconel because it did not erode away from steam wearing it off. The blade material was proprietary material and Westinghouse or General Electric would never tell us what it was. Even if you decide not to repair like I explained a TIG weld in replacement piece will probably be the easiest to blend in with very little heat distortion. If your hood is aluminum material all what I mentioned will not be the way to repair it..
 
 
Gary Parsons
Hi Gary, thanks for your comments, unfortunately, most of the processes you mention will not work, the hood is made of aluminum. As for you comment, "the louver repairs are simple too", anything is easy if you have had enough experience with what is being done. I have much more experience tig welding steel than aluminum and ultimately, I will probably be using gas welding for the repairs. I am trying to keep the distortion down to a minimum and still have the form-ability to make everything straight.
Pat

To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
