

I have been told there are no tubes made in the US any more.
Cordially Mike
Being a custom car,I'd think anything that would not leak air would be OK.
Being able to FIND these odd sizes is a minor miracle today.Back in the days when these cars were sold for $600 or less,7:50x19 tires were extinct which explains the 7:50x17 wheels on cars that had the 19's when new.
You might check European sources.I saw a Murphy CC at Auburn a few years ago that had Michelin 7:50x19's,six of them.
If Matt in Germany sees this,maybe he can source out something not made in China.
 
Bob Roller
Being a custom car,I'd think anything that would not leak air would be OK.
Being able to FIND these odd sizes is a minor miracle today.Back in the days when these cars were sold for $600 or less,7:50x19 tires were extinct which explains the 7:50x17 wheels on cars that had the 19's when new.
You might check European sources.I saw a Murphy CC at Auburn a few years ago that had Michelin 7:50x19's,six of them.
If Matt in Germany sees this,maybe he can source out something not made in China. 
Bob Roller
 
 
Hello Joel and Bob,
 
I haven't bought a new innertube in the last 6 or 7 years, but it looks like there are some similar tube-problems in Germany aswell. China-junk is everywhere!!! :?
 
The problem would be the (today often used) "artificial rubber" material (Butyl-Rubber or IIR). So I can't give any recomendations. Maybe Andreas (61xlch) has more experience with todays tube and is able to recomment a brand.
 
Farm-machines/-tractors often use innertubes in its tires, so if there is a farm-machine dealership/shop in your area, you could ask there for a good quality tube. I am pretty sure they know good quality. No dealer can allow himself to sell junkstuff (a second time) to a farmer when he wants to stay in business with the farmer :wink: 8)
 
In question of "valve-style", I guess that an "elbow-valve" faces more centrifugal force (on a fast spinning wheel) than a "straight" valve -> more friction btw. rim and tube?! -> higher danger of damaging the tube?
 
 
Cheers
 
Matt
I have bought tubes from "farm" tire stores and universal tire in PA. Just put one of universal's on a Stevens Duryea but have not driven it yet. The Michelin's are not available in many sizes and are very expensive and very thick. If I have any tires with tubes I can't mount myself they go to the "farm tire store". They no how to mount tube tires and most "regular" tire stores don't.
Cordially Mike

Don't you mean they have lock rings? I didn't think Duesenberg had split rims. But what do I know.
Cordially Mike
The largest tubes available in Germany I found are 7.00-19, like these:
 
http://www.oldtimerreifen24.de/Zubehoer ... tlich.html
 
But it might be useful to ask this shop for other sizes, possibly not listed in their Onlineshop.
 
Good luck.
For a definition of lock ring rims and split rims go to Universal tires web site. The term does seem to be used interchangeably but the two rims are not the same. Not even close.
Cordially Mike
I always heard them referred to as snap rings and learned early that the safest way to air up a tire with these devices is to make sure you are off to one side when doing it. If the tire and wheel are off the vehicle,turn the wheel and tire fACE SIDE DOWN.
 
Bob Roller
When I did the 1932 Packard Twin Six with the 7:50 x 18 Bedford Double White Walls, the 90 degree nickel plated metal stems came via Lucas Tire (via Universal Tire in Pennsylvania). I have not called Lucas in a while, though I usually ask for "Maytag" and he does a fine job in helping.
 
You will need flaps as well - wire wheel spokes and tubes do not get along.
 
And you will need to use talcum powder (just plain Jane old fashioned Johnsons baby powder works great) on the tubes, flaps, and casings - just a super light dusting. The talc keeps everything from sticking together and allows some flex movement. A lot of people will tell you this is not needed, but having put well over 100,000 miles driving prewar-cars I have never had a bias ply tire/tube let me down on the road. My tire guy (who also has 1930's cars) just retired on Wednesday of this week after 60 years as a Goodyear dealer - he swears by talc.
 
I usually lay the hub of the wheel up on some lumber, put on gym shoes, and and "walk" the lock ring in (tuck one end in and then step on the ring and walk around it) - I have had good success with both chrome and painted wheels.
 
Also, I have become paranoid about code stickers in tires - always double check as stickers also do not get along with tubes.
 
And, inflate in a cage at a store that does truck rims. It is not an old wives tale - lock rings really can kill and maim people.

Thanks, that sounds like good advice. I'll go with the nickel 90 degree stems.
 
At the garage where I worked in high school, sometimes we got wheels like this and they always called them split rims. So I learned something new, thanks.
I think of a split rim as more a wooden wheel thing (and perhaps some trucks) - the rim actually is not a continuous ring and you have to use a rim spreading tool (a sot of three point jack like tool) to get the rim over the wheel assembly - also more fun than a barrel full of monkeys.
 
 
I just did 10 Auburn 852 wheels over the past month - My broken record phrase has been "do not chip my paint".
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
