Is that a overhead cam engine? Looks like it might be.
Cordially Mike
Is that a overhead cam engine? Looks like it might be.
Cordially Mike
 
 
Hello Mike,
 
according to the following link, that has an overhead camshaft and four valves per cylinder.
 
The displacement per cyl. is about 7.1 ltr (433 cui) :shock:
 
https://grrc.goodwood.com/festival-of-s ... at-s76-fos
 
 
Cheers
 
Matt
Here is another mad machine
 
BRUTUS powered by a 46.9 l V-12 BMW Warbird engine
 
 
I would like to see the valve train, I'm trying to imagine how they would run four valves per cyl. on one cam. The early Bug's ran three valves per cyl. but with two cams.
Cordially Mike
I would like to see the valve train, I'm trying to imagine how they would run four valves per cyl. on one cam. The early Bug's ran three valves per cyl. but with two cams.
Cordially Mike
 
 
Hello Mike,
 
I don't know how it works in that engine. It is possilble that it works with "spreaded" rocker arms/lever -> one arm/lever moves both valve on the intake (or outlet) side. So (for a four cyl. engine) there is only one camshaft (with 8 tappets on it) needed.
 
An example (in a different type of engine) for spreaded rocker arms are the early Harley Davidson 8 Valve Racer OHV (not OHC) engines. Two valves are driven by one "spreaded" rocker lever -> one tappet (and pushrod)
 
Here you will find a picture:
 
http://commons.wikimedia.org/wiki/File: ... emphis.jpg
 
 
Cheers
 
Matt
I would like to see the valve train, I'm trying to imagine how they would run four valves per cyl. on one cam. The early Bug's ran three valves per cyl. but with two cams.
Cordially Mike
 
 
Hello Mike,
 
when you follow the (Old Motor) link that DavidK posted, you will find a "Vimeo" Video and when you stopp it @1.29 min. running time, you will have a good view to the valve train.
 
Here is the link to the video
 
 
It looks like that there are three! tappets for each cylinder on the camshaft, so one pair of valves (intake or outlet?) will be pushed by a spread rocker lever.
 
 
Cheers
 
Matt
I have a 600 cubic inch 1925 Sterling Dolphin engine with 4 valves per cylinder and only 2 push rods per cylinder
K Clark
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
