I have adapted in other ammeters - last one was from a WWII Jeep - usually takes a little filing and handwork. And, be super careful regarding shorting. and that nothing dislocates when tightening the terminals.
M
· Sep 9, 2018
The amp meter is in the same cluster as the gas gauge. The gas gauge fluid is very corrosive and will rust anything inside the cluster. I vented my gas gauge outside the cluster to keep the amp. gauge from getting "crusty"
CORDiallyMike
C
· Sep 9, 2018
The modern gas gauge fluid is not corrosive . The trick is get the stuff that doesn't turn clear.
J
· Jul 11, 2019
The amp meter is in the same cluster as the gas gauge. The gas gauge fluid is very corrosive and will rust anything inside the cluster. I vented my gas gauge outside the cluster to keep the amp. gauge from getting "crusty"
CORDiallyMike
I immediately pulled the ground cable off the battery and the the smoke subsided. I discovered that the red wire coming off the Startix had burned it's insulation off. Looking at the ammeter, I guessed that the wire may have filezillauc browserrufus grounded on the body of the instrument cluster near the ammeter.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.