George... I believe its time to rebuild this water pump. I'm sure Carol will have a replacement seal but... No telling what machining you may have to do to make is fit. Too bad Henry Portz has passed. His pumps had a better computer designed impellor and his seals were a modern type but there was machine work needed to install them.. Sadly I have no idea what original seals were used. If I had a part number it would be simple to find one on the open market. If you take this leaker apart for repairs just take the major parts to a bearing shop. They will be able to fix you up...
 
 
Gary Parsons
this post was meant for L  29. How it got hear I have no idea.
Have built many 812 pumps but never L29
Was not reading you were working on an L29 water pump. I believe the L29 has a packing gland with some square packing rings in the gland. But really not sure. Mike will be better person to talk about this....
 
 
Gary Parsons
I have given EL the info. he wanted on the L-19 water pump seal. I have been on a tour in Utah and then to the ACD Eastern meet so am late on responding. The way to use a modern seal on a L-29 water pump is to machine the inside of the packing nut for a National seal no. 470954. Shaft and bushing must have good clearance.
CORDially Mike
I knew you were the person with the best advice on this.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
