Hi John,
 
That's true.
However, you need only ONCE to have a brake line rupture to see the wisdom of having a dual system. I know--been there.
BTW--I just sold a 2007 truck with 179,000 miles. The next day a brake line failed. The new owner was able to stop safely.
 
--Tom
Hi,
 
If you are going to go to a combination for disc and drum brakes, you should install an inline proportioning valve. The pressure requirements for discs and for drums are different. Proportioning valves are available at Jegs and Summit Racing. Jegs offers them at:
 
http://www.jegs.com/pt/Brake+Proportioning+Valve/4294959029
 
--Tom
I have found that the people who have done the least "improvements" on their cars have the least trouble on tours! As Henry Portz once told me, most problems with old cars are caused by the owners.
CORDiallyMike
I would also love to see if someone has installed this on a 34-36 Auburn. If so, offer a schematic.
My 72 Chevy dump truck blew a line and I ran into a school bus. (Buses are well built , broken tail light on the bus, but the front clip on my truck was caved-in)
I have found Cunifer bends very nicely but is hard to get to seal. I would still us it though.
CORDiallyMike
I use Cunifer brake lines. For years I was frustrated with steel lines and the inability of my auto-parts store flaring tool to make a decent double flare. Finally I bought an Eastwood professional flaring tool. Not cheap, but after I made the first flare I didn't care about the cost. It has never made a defective flare in Cunifer or steel.
 
 
 
--Tom
Does that apply to old cars? What about cable brakes or Model T and A Fords?
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.




