tried registering with acdclub but i could not complete the registration progress cause their conformation number was just not showing. No idea why
I am not sure what this means. I can say the ACD club is where you want to be. There is a lot of knowledge about your 810 there. If you are having problems joining the club, PM me, I can help.
The filling caps under the cowl lid were for adding oil and water without opening the hood. Confused driveway attendants were found to be mistakenly adding water to the oil and oil to the water so they were deleted on later cars. 
It looks as though that hole in your firewall was cut to access the timing chain at some stage. Your engine looks to be correct as it is, distributor, fuel pump, air cleaner and regulator all appear original. 
These cars are great drivers, having driven thousands of miles in mine, but strongly recommend you do the gearbox mod ( thicker thrust washer) and replace original cyl heads with the remanufactured ones that are now available with larger water capacity.
Keep us all posted on your progress !!
 
I agree with Cordguy - everything I have heard as to why exterior oil/water fills were deleted.  And, original aluminum heads tend to be a timebomb.  I hear gearboxes are equally a weak part of the car.
 
Good news:  everyone says incredible cars to drive when well sorted  (every one I have been in has been impressive, but even the most faithful of drivers have apologized for this or that not being up to snuff)
That big square hole in the firewall does not belong (it is was cut for a service issue)
Shall have the square cut back to original .
 
CordguyAug 22, 2016The filling caps under the cowl lid were for adding oil and water without opening the hood. Confused driveway attendants were found to be mistakenly adding water to the oil and oil to the water so they were deleted on later cars. 
It looks as though that hole in your firewall was cut to access the timing chain at some stage. Your engine looks to be correct as it is, distributor, fuel pump, air cleaner and regulator all appear original. 
These cars are great drivers, having driven thousands of miles in mine, but strongly recommend you do the gearbox mod ( thicker thrust washer) and replace original cyl heads with the remanufactured ones that are now available with larger water capacity.
Keep us all posted on your progress !!
 
can you guide me to any link , where this gear box mod is in detail.
will get it done on my car as well.
 
 
thank you,
 
regards,
Allan

You need to buy the club newsletter CD from the ACD club.  It has lots of info from the last 60 years.  I think the gear box mods are probably there.
Auburn Cord Parts should have the data sheet for modifications to gearbox mainshaft and also supply the thicker thrust washer. This is an inexpensive mod that should not be overlooked as Cords are known for exploding gearboxes without it !
 
 
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
