If you are looking for a dimension for a 1934 - 1936 Auburn frame I might be able to help you out.
If you are looking for a dimension for a 1934 - 1936 Auburn frame I might be able to help you out.
Curti, any frame charts with dimensions for those years will be greatly appreciated!
There are no charts. I have a 1934-36 rolling six cylinder frame and a bare eight cylinder frame that I can take measurements from.
Any shop manuals for these cars that shows the frames and dimensions? This is what I am seeking... thanks guys! 🙂
I am not aware of any. Try contacting Jon Bill in archives at the ACD museum.
X-Frame -- I have seen what you are looking for in the "Motors Handbook." Not to be confused with the magazines Motor Age or Motor Magazine. This is annual publication marked as 20th edition,21st edition, etc. I have in my auto library the 28th edition and this covers all the frames in 1951, Also have the 30th edition which is a 1953 issue covering all makes and models of frames for that year.These both give photos and dimenions for the bare frames. I am not sure the earlier publications will be of value to your search.The war years disturbed many things.However, if they were published during the war years the ones you need are 7th edition, 1930. And up to the 17th edition 1940. I would suggest trying any major auto library. Start with the AACA library in Hershey, Pa. Hope you find your needs! -- Regards, Bob
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
