
Auburns are in my humble opinion, depending on years equal to or less than a Buick. There are lots of variations on models and series from both cars. The question you should ask, and understand is the relationship of drivability VS price. The cars that perform like nickel cars are going to be more affordable than a car that runs like a chrome CCCA Classic. I consider the ACD club and their cars a good choice from the organizational standpoint............very active and they are all pre war. Buick club is huge, active, and much more focused on post war stuff. I recommend you buy a 90 Series Buick or a 1931 or later Auburn 8. If thatÔÇÖs out of you shopping range........I would stay with thr BuickÔÇÖs. How you intend to drive, and how much you drive......and if you have a trailer as an option are all considerations. If you can......buy the biggest engine and best driver of the series..........they hold values better. Hope all of this makes sense.
jpsDec 27, 2020Some questions I have:
1) How difficult is it to find a sound mechanical car in good driving condition but which may not have perfect cosmetics (paint, interior, etc) - ie, one that would be a good driver?
 
The one that just closed on BAT this week might have been what you are describing.  It sold for $13500. 
 
It may not be that easy to find what you describe.  I have a 1927 Auburn 6-66 and there do not seem to be many others around.   You do see a few more 1928 - 30 models, but still not a lot.
 
 
1 hour ago, jps said:2) How difficult is it to find replacement parts like a carburetor, distributor, starter motor, exhaust manifold, etc?
 
Auburn used either Lycoming or Continental engines so parts are around.  Mine has a Schebler carb, Stewart-Warner vacuum tank,  and Delco starter, distributor and generator.  These are all common.  If you were looking for body parts, that may be a different story, but there are some around.
 
1 hour ago, jps said:3) What are the weak points of 1925-1930 Auburns in general (what parts tend to break, or wear out, or leak, or stop functioning first)?
 
My father bought this car in 1961.  It has been used quite a bit (less in recent years), but not worn out.  I can't think of anything more than typical wear items.  It does tend to run hot, and always has.
 
1 hour ago, jps said:4) What year did Auburns start to have fuel pumps?
 
I don't know, but the 1929 on BAT this week still had a vacuum tank.  My tank works well, but I did have to address some wear issues in it not too long ago.
 
 
1 hour ago, jps said: 
5) Is there much use of pot metal in Auburns of this period - especially in areas like the carburetor bowl, distributor housing, ignition switch, etc?
 
Inside the body - door handles, headlight switch lever, advance/retard lever.  Not the carb or distributor.
 
1 hour ago, jps said:6) Anything else you might find relevant to helping me make a decision
 
The 6 cylinder is not a fast car, maybe like your Buick.  Top speed is around 40 mph.  Mine has mechanical brakes.  The hydraulics of the later years would probably be nice.
 
However, it is a smart looking car, for a twenties car, and has been extremely reliable for many years.  I like the fact that it has great Auburn heritage and is relatively rare.   They don't seem to sell for a lot of money, so I think they're a pretty good deal.  But you need to decide what you want to get out of it.  It's not a car I'd choose to drive on long tours, although we did that as a family (with 4 kids) back in the 60s.  I'd rather drive my brass car.
 
 
 
Thanks to both of you for the great feedback - this is exactly the kind of advice I was hoping to get.  I appreciate it very much.
 
John

Join the ACD Club, attend the meet in Auburn over Labor Day. Introduce yourself to the guys.......and explain your interest. They will be more than happy to help......and often know of good cars off the radar. 
Having part-owned a pair of 1929 Auburn 8-90 Cabriolets, I will tell you they are very nice automobiles.  
 
Parts of course can be a challenge, though a good group of owners and does not take more than a couple of days and two dozen phone calls to get it running again - and a checkbook too.  
 
As to die cast - the interior door handles and window cranks were diecast and not inexpensive and there was also diecast spark, throttle, and light sectors at the steering column hub and those were not inexpensive either.  The proper interior window handle and door handle bezels are brass and a bear to find now.   Also, somewhat pricey were the 4 knobs on the lower dash panel.  The radiator neck is also die cast and I chose to replace them both, but had someone been a little more careful the original dies cast probably would have replated well enough to last another 50 years.  
 
The carbs are a big chunk of bronze and aluminum.  
 
The fuel pumps are mechanical off of the block/camshaft. 
 
Auburn's did not use very high quality woodwork in the bodies - my experience is Poplar and Apple (but a surprising number of cars still have nice original wood in them).
More great information - thank you for the ideas and the details.  I wanted to get started thinking about this beforehand, since I am pretty much set for the winter and will need to sell what I have first since I only have room for 1 car.  So I have the opportunity to research my options a bit. 
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
