Looks to me like someone, either factory or later, made a "blind rear quarter" top for a phaeton, thus not utilizing the rear swing up side windows. It would be a neat look from the outside, but you'd surely need some great side rear view mirrors!

That is a good guess. Car might be an attractive convertible Victoria.
Are there any sites that might have a bunch of old Cord photos from the 30's or 40's? Probably a slim chance of finding a picture of this top setup on a car but it would have looked unusual so it may have been photographed.

The hamb has a hot rod cord thread that got closed (for no good reason) that has a picture of a newer phaeton with a Victoria style hardtop. Looks pretty good.

Here is the thread and the car I was thinking about. When they closed this thread I got very sour with the HAMB and have not paid as much attention since.
That is an interesting thread. Really a shame they locked it. I could have added my car. It's got a flathead cadillac (surplus tank motor) with dual carbs edmunds heads and they chromed lots of stuff under the hood. To boot it hasn't really been touched since the 1960's, possibly even the late 1950's. It fits all the latest crazes, barn find, survivor hot rod. LOL Too bad there is a darn good chance it's going back to front wheel drive with a driver restoration rather than preserving it as is.
That Cord is a similar idea. It almost has a sportsman look to it. I would of thought longer blind quarters on the top.

Could you post some pictures of the engine compartment? Do a detailed cost analysis before putting it back. A period hot rod like that is a cool thing. I'm an originality nut but sometimes an original hot rod is cool too. I would never like to see a car cut up now but that was done 60 plus years ago.
I'll shoot some pictures today. It's dusty grimey oxidized (patine'd) under the hood. But you could see what they were going for. They even covered the firewall with smooth chrome sheets. Chrome Generator, fan, pulley,water necks. They were trying to make it a show piece I think.
I did give some thought to just getting it going like it is. The engine has a couple stuck valves (so it needs a Valve job atleast) and the brakes will need to be all rebuilt. I'm not real crazy about a few of the things they did when they converted it. Namely in the steering department. They actually cut a notch in the radiator and sent the steering shaft through it. Fortunately it wasn't an original Cord radiator so nothing lost. This would need to be adreesed before I drove it as one of the steering brackets is actually welded to the manifold.
I was trying to determine how much the car was actually driven with the conversion if it ever was, but I did notice the carpet they installed with the relocated accelerator pedal is worn right through to the floor board so it must have been driven some.
They did put dual exhaust on it with an H pipe so they were trying to do things right and they made the side pipes functional. I guess the good part was they didn't try to modernize the looks of it like others I have seen. Infact the only liberties taken with the body were they nosed the cord emblem off the tranny cover and filled the cowl vents, which was done by closing them and filling them is so Hopefully they are salvageable. I do have a set of mint cowl vent doors. (I hope they didn't destort anything when they filled them as I think they may have been leaded in.)

I think that is really cool.
If I could get it on the road for 3,000 or so I would do it. But if I spend anymore it feels like lost money as I will have to tear everything I do out when I convert it back. I know the motor needs to come apart for a valve job at least. One of the water necks leaks I'm assuming by the electrical tape wrapped around it, Tires are shot. The brakes will have to be gone through, The exhaust rehabbed. Just all the usual stuff with anything stuffed in a garage untouched for 40 years.

That thing is cool and unique. Have you done the math on putting it back?
I have actually acquired alot of parts to put it back to original configuration including a really nice pair front axles/joints, Rebuilt correct Carb.,Rebuilt Starter, NOS stainless sleeved master cylinder, A couple of sets of original brakes, a reproduction set of radiator tanks and an original strap to make a new radiator,NOS E-brake cables, A nice set of bohnalite heads, Correct hood latch and prop, original steering wheel, control arms. Front spring, Shocks, all the steering arms but I still need a good box, Pretty much the entire set of guts for a transmission all in good shape. Restored complete throttle linkage assembly and brackets, I have pretty much a truck load of mechanical tid bits from a Cord restorer that was closing up shop. I'm still missing an engine and a tranny case. It has the original rear springs still so i just need the solid rear axle.
I'm still thinking of buying a mechanically mostly complete parts car (stalled sedan project). They seem to turn up in the low 20's. The guy I got my parts from said that would be the best thing to do. He said the car is just in too good of shape to not put it back original. I don't mind the conversion, I just don't know if the quality of the build is good enough for me to want to put the effort into restoring it as a frankenstein. Much of the paint all be it thin in spots could be buffed out as you see and be fairly presentable The right rear fender needs to be painted and the hood probably does as well because of a couple of storage dents. Especially for a Survivor, dare I say it Hot Rod. The interior can be used as is and is in pretty good shape.
Maybe I should take a poll. All in favor of leaving it alone and getting it on the road let me know. Those that think I should not waste my resources and just wait until I can convert it back, let me know as well.
Well, here goes an opinion!
Right now, it's just an expensive paperweight. Even with the wrong drive train, you paid good money for it. It's both more fun and worth more money running and driving, in either configuration.
Get it running and driving LIKE IT IS while you keep acquiring all the parts you need to convert to original. That might cost a few thousand, but you can drive it and have fun with it NOW. If you figure another year or two to get all the parts together, and anywhere from a year to five or more to get it back to original (yes, I know we all say we can do it in 6 months, but really? I mean, really will that happen?). I needed to put in some, not all, new wiring, and rebuild some of the shifting mechanisms for my Cord phaeton, so I could take it to ACD meet, and THAT took about 4 months!
It's still a great and interesting car with the conversion. Get it running!
My two suggestions are:
1. Go to Auburn IN this Labour Day weekend, it will help you to decide what to do with your Cord; and
2. Of the parts you need, a good steering box will be the hardest to find. Likely not the most valueable part you need but one that does require some searching. I would start now.
I have a few trans cases that you can have...if you want to drive to Toronto for them.
I figured the conversion back to original would take minimum of a year or 2 depending on what state the parts car is in. I have seen a few for sale that had a rebuilt engine and transmission as well as other sub assemblies. That would obviously speed things up. I'm in no rush to get it on the road at this point. We just bought a larger house, that came with a larger shop which is pretty much just a shell. I still need to finish that off and move my parts business here from my old shop, which I still own. There is a fair amount to do around here at this point as well not including the shop. I do have other turnkey cars. The only good thing about it not being near running is every system needs to be redone, so it's not going backwards just sitting in the corner of my shop. I have atleast one other paperweight that is closer to being road ready.
I do have a steering box I believe in my pile of parts but I know it needs to be rebuilt and might even be disassembled so I'm sure there are a few trinkets atleast missing from it.
Well, of course my comments were based on you having time in the first place to work on it! I have comprehensive understanding of this project waiting for that project because the other project is running behind since the original project isn't finished......
Well, of course my comments were based on you having time in the first place to work on it! I have comprehensive understanding of this project waiting for that project because the other project is running behind since the original project isn't finished......
Exactly my thoughts! This after I just spent an hour plowing the driveway. Now I have to go make some money so I can pay the guy who plows my shop his 75.00 for plowing that out today.
Well atleast I have the car to start with and a place to keep/ work on it.
I think it depends on what you want to do with the car once you've got it running, in either configuration. I would probably get it running and reliable "as is," and drive it everywhere (probably without painting, unless those areas would continue to deteriorate if not). Parts are a LOT more available and less expensive for the Cadillac. Since you've collected all of the parts to put it back to original, you basically have a complete phaeton, worth no less than a disassembled unaltered phaeton. If/When the time comes that you want a show car, you merely have to find the time to do it.
I think it depends on what you want to do with the car once you've got it running, in either configuration. I would probably get it running and reliable "as is," and drive it everywhere (probably without painting, unless those areas would continue to deteriorate if not). Parts are a LOT more available and less expensive for the Cadillac. Since you've collected all of the parts to put it back to original, you basically have a complete phaeton, worth no less than a disassembled unaltered phaeton. If/When the time comes that you want a show car, you merely have to find the time to do it.
I was originally thinking that, my only concern was dumping a pile of money into something then tearing it all out and scrapping it to put it back the right way. I guess it just depends on time and finances as well as if I end up buying a complete parts car with rebuilt engine and tranny. Then it would probably be wise to just put it back stock at that time, even to just a running and driving version (not fully restored to get the bugs sorted out)
If I don't come up with the motor and tranny before then and I get the itch, I guess i'll just tear the heads off the caddy and see what it looks like inside. I do have a completely rebuilt 39 Cadillac Engine in the corner I have had for 15-20 years. Unfortunately the heads I don't think will fit it but it would be a way to put a good running motor in it as a pretty much bolt in swap.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
