

I recall something about owners that change the brake fluid to synthetic have this issue.
 
 
Gary Parsons
I have never heard of a more sensitive brake pressure switch. I don't have that problem with my L-29. Have you tried another switch? They have a seal between the brake fluid and the contacts for the switch. When I have cut ones that failed apart, I have found that the contacts had arched enough that the contacts were compromised. May be yours is Failing but still functions with much pressure.
CORDially Mike
Hi Joel,
Hot Rod companies such as Painless wiring and Ron Francis Wiring have low pressure brake light switches. They work in the range of about 20-50 lbs. You may want to try Yogis 800 373 1937, they carry both lines. Good luck Pat
I learn something every day, Thanks for the info. Pat.
CORDially Mike


The problem with LED is they won't work with turn signals unless you make modifications I have been told. Don't have personal experience.
CORDially Mike

It should Joel. No one understands your hand out the window.
CORDially Mike


One day after lunch with Randy I saw a car the shop was restoring almost ready to show. It had turn blinkers on both sides front n back. I asked if those are a judging deduction. He answered yes but these are removable and wireless. Great idea I thought. I saw the piece on the column and how easily the bumper pieces come off. They were independent of and brake light system too. I did not get a name but I'm sure he would answer questions.
 
 
Gary Parsons
Joel, not that I'm hijacking your post, Gary mentioned about wireless turn signals and I thought I would share what I'm doing for my speedster build. I decided to run electronic power steering, but by doing so, I lost the ability to pass any wire through the column. I made an aluminum spacer between the wheel and the hub adapter that houses a wireless remote, hard wired to micro switches for the turn signals, 4 way and a paddle switch for the horn button. I am using the 3 balls on the wheel for the turn signals and 4 way. There is a wireless receiver (mounted behind the dash) that controls the remote so no wires need to go through the column. I have attached some pictures, hope you enjoy. Thanks Pat
There is a self-canceling turn signal box available that works with a toggle switch so no unsightly steering column switches. You can hide the toggle under the dash. I have that on two of my cars. I have buzzers on the others to remind me to turn them off, but the box works better. The name of the Co. is Electro-Tech at www.turnswitch.com phone 763-780-2861. They are in MN. The system I buy has the toggle switch and is $150.
CORDially Mike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.







