I have my 1923 Roamer rebuilt far enough to give visitors a meaningful ride on the property. It is the G1 engine with 4 1/4" bore, geared 33mph/1000 revs in the overdrive Brown-Lipe gearbox. In about 150 yards going uphill from the house to the workshop I can get it into top. Downhill I dare not open the throttle in direct or overdrive, because the brakes are so poor. Engine sounds like an oversize 3 litre Bentley with the exhaust cutout shut; and just plain loud with it open. Gearchange is tricky. It is almost impossible if you try to double de-clutch. Only way I can do any good is to declutch and push it straight through. Direct to overdrive and back are a delight that way. (Ralph Buckley instructed me to change like that on his T-head Mercer in 1980).
The combustion chamber is really very clever, with short flame travel and squish areas. Original owner told me he got as much as 25miles/imperial gallon on 20's fuel.
The conrod bolts, oil pump, and a couple of other items are the same as the Rochester Trego engine of the Mercer. Fortuately there are 4 of these 3/8" bolts/big end, but the material/heat treatment of them is suspect. My car showed 14,000 miles on what remained of the original speedo, but several of the 16 bolts were stretched beyond the elastic limit. Before I had a lathe to make my own I replaced then with big end Bolts from a Continental O-300 aircraft engine.
It is better to run a pressure feed to the hollow rocker shaft, rather than fill it through the oiler with a squirt can.
A friend took digital video of me giving him and his friends rides on a couple of occasions. He has promised me a DVD of that, which might interest some people when I have it.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
