Former Auburn assembly line workers reported during the modern era that they installed the plates when the cars were put together on the line. Thus, the individual cars were not tested, but there's little doubt that the speedsters in particular could exceed 100. Note that there were subtle variations in the speeds shown on the plates. The plates are in fact reproduced now. 
Interesting story, but I still consider that hearsay, not fact.  I'd like to know if there's any hard evidence that these plaques came on the car new, such as an Auburn factory bulletin or such.
 
I have it on pretty good authority that these plaques were first made in the 1950's or 60's, and they've now migrated from a novelty item to "fact" status, when in fact no such thing was ever done at the factory..
 
Just asking for hard proof, either way.  thanks
Th Ab Jenkins tag was indeed installed on all 35-36 Auburn speedsters. (No other models)  The Auburn part number is G5437. This info comes from the 
Auburn Master Price book.   " Plate - speed certificate 851 speedster "  I have an original with the speed at 101 MPH.   Ab Jenkins did not
drive every speedster, but he did drive at least one at Bonneville at 100+ mph  For 24 hours. Google will produce a 20+ minute vid of this.
I hope this helps.
Excellent, that's what I was looking for, if it had an Auburn part number at the time then it would be authentic on a speedster.
 
That said, factory tags should all have the same speed on them, and not vary by tenths of a mile per hour.
 
Thank you.
Someone had mentioned that they'd seen tags with different mph numbers on them, that was the reason for my comment.
 
The tag on any other car than a speedster would be incorrect, from what I'm seeing.
 
thanks again...
It is my opinion that the Ab Jenkins tags only were installed on speedsters.  This is evidenced by the description in the book 'speedster' .   Later, people especially with S/C cars liked to put them on the dash, but the factory didn't do it.  I have seen them under the hood and on six cylinder cars.   It is all fine if they are having fun !
I believe my question really goes to preservation of history in a correct manner.
 
There are already so many myths out there that people take as factual.  For example, a lot of people believe Henry Ford invented both the automobile and the assembly line.  We know the first is not true, and as to the assembly line, he took that concept to a level not seen before, but he didn't invent it.
 
There is just so much misinformation out there.  I watched a Chasing Classic Cars last night, he'd bought four brass cars, one of which was a Buick Model 16.  The show proceeded to say that this model was only built in 1910, which is not true, it was a 1909 model also.  Nitpicking, but that's just a small example of the things that aren't correct, from a historical standpoint, yet become "fact".
 
OK, off my soapbox!  thanks and I agree with "only speedsters" on the plaque.....
   I am in complete agreement with you. We have no control of what others do.
My hobby is to restore the car the way it sat on the showroom floor after dealer prep. No better No worse.
It is easy to over restore a car. It in not so easy to do the research.
CurtiDec 9, 2015Th Ab Jenkins tag was indeed installed on all 35-36 Auburn speedsters. (No other models)  The Auburn part number is G5437. This info comes from the 
Auburn Master Price book.   " Plate - speed certificate 851 speedster "  I have an original with the speed at 101 MPH.   Ab Jenkins did not
drive every speedster, but he did drive at least one at Bonneville at 100+ mph  For 24 hours. Google will produce a 20+ minute vid of this.
I hope this helps.
This post will help clear up the 100 mph tag question for AuburnÔÇÖs, discussed on another thread....
trimacarMar 11, 2020This post will help clear up the 100 mph tag question for AuburnÔÇÖs, discussed on another thread....
Thank you!
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
