Try some either propane or map gas heat on the aluminum head area. You do know the capillary tube nut unscrews from the fitting in the head. May need to use a backup wrench to keep the fitting from loosening in the head. If you try removing it as one piece the capillary tube twists up and usually breaks.
 
 
Gary Parsons
Thanks for your very prompt reply and sorry for my excessive delay in responding. The "gland nut" was easily removed but the "probe" will not come out of the "screwed in fitting". I loosened that head fitting very slightly and the probe rotates with the fitting suggesting that the probe is stuck in the fitting and not by "who knows what" in the head cavity . Of course I do not want to rotate the fitting enough to damage the tube. I did try heat on the fitting but was VERY cautious not to disrupt the brazed tube with excess heat - at least not yet. I also tried VERY light prying in the cavity of the fitting but there is nothing to really pry against without risking damage. I am almost to the decision to do something crazy like cut the tube and hope I can find someone to fix it but I have yet to find anyone who can do that. Help!!
Thanks;
Lee Carr 713-816-8109
Build up a clay or epoxy dam or trough around the fitting and put your favorite penitrating oil in the trough for as long as you can stand it with occasional vibration every day or you chose the time. Give that a try before more drastic measures. Wolf Gauges used to repair temp. gauges.
CORDially Mike
THis is a very common problem in Cords. On some Cords I have had luck removing the temperature gague from the dash and rotating it at the same time I rotate the fitting out of the head. This doesn't work if the line is tight behind the firewall pad. Also if it does work you are still stuck the the gage in the car, you just have better access to get the tube out of the fitting.
 
If all else fails The Temperature Gage Guy in Vermont does an excellant job restoring the gage.
Jim
Impatience will cost $100.-$150. !
Give that some consideration
I don't think that is the price any more. Just had a speedo repaired, not restored, for a Corvair. $450. From well known MI. shop.
CORDially Mike
Just had two 67 Corvette Amp. gauges fixed, not restored. $375. Was going to try another place this time but they said it would be 10 weeks. Sent it to the same place as the speedo and it was back in 4 days!
CORDially Mike
Did you get the sensor out and how?
CORDially Mike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

