When you state "both positions".. Are you saying both the oil level and the gas tank level show full no matter what levels are really in there? If so you might disconnect the oil level sender and then the gas tank sender to see if either of them are causing this issue. My guess is the oil level sender in the oil pan has failed but testing will tell for sure. Both my gas tank and oil pan sender are apart on my bench if you need pictures of the internals.
 
 
Gary Parsons
Have you figured out what the electrical issue was yet? Please, When you find it post it here so many others like myself may benefit from the issue and repair.
 
 
Gary Parsons
Perfect explanation of a fixed problem. If my gauge has the same issue I can relate to this and know how to fix it.
 
 
Gary Parsons
i have opened my fuel sender in tank unit. I posted pictures of what it looks like before and after. Did the oil level sender too. That unit is slightly different and it was filled with horrible sludge.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
