John-
 
The bore is the same 115-120-125 (3 1/4") only the L-29 had the larger (3 3/8") bore at engine no. FF4444.
 
Stan
Sir: Did you ever get your carburetor adjusted so that it would run like it should?
I can send you a copy of the sheets on how to adjust this carburetor that I have in my literature. Don of Indiana
The Lycoming MD Engine was used in the 1928 Auburn 115, the 1930 Auburn 120, and the 1930 Auburn 125. The engine is the same for all these cars in regards to displacement and the rating is 115 at 3300 rpm. During the 30's it was common practice to change the car model without any basic engine change. This may have caused confusion but it is believed that it sold more new cars.
Prior to my retirement as V. P. of Engineering at Lycoming I was able to find a four page specification for the Model MD engine which includes the power curve and other other specs. If you would like a copy of this specification I can email as an attachment or forward copy by snail mail.
See ACD directory for my address.
CORDially Al Light
I know this is a long shot, but would your Scheduler S3 SV154 carby still be available? I'm desperately searching for one of these...
Cheers,
Michael Anderson, skidmarking@hotmail.com
(Bugatti T49 project)
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
