I'm surprised that you have not had any replies but the Labor Day weekend is on in Auburn.
You could scale the hex size off the picture if you can measure the diameter of the harmonic balancer.
Use a piece of stiff wire or thin rod bent to a "C" shape to make contact on the diameter.
You should be able to get a reasonably accurate figure for the hex socket required.
Terry CockerellAug 25, 2026 I'm surprised that you have not had any replies but the Labor Day weekend is on in Auburn.
You could scale the hex size off the picture if you can measure the diameter of the harmonic balancer.
Use a piece of stiff wire or thin rod bent to a "C" shape to make contact on the diameter.
You should be able to get a reasonably accurate figure for the hex socket required.
Thank you for that suggestion. I used plumbers putty to determine the size.
dragonflywoodsAug 25, 2026 Thank you for that suggestion. I used plumbers putty to determine the size.
It proves "Where there is a will there is a way".
I had a Merecdes Benz truck with a similar problem with the flywheel. I had to get under it and use a lever to move the flywheel a bit so the starter would engauge.
After about 12 months of this plus saving money a reconditioned engine was fitted.
.jpg.2de92d84212b9600aa6610186a5054db.webp)
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
