I believe this part is a cutout which just prevents current from travelling back from the battery through the generator when the generator is not producing power. The voltage is regulated by the 3rd brush which can be moved closer or further to the fixed brush to adjust output. The brushes are accessed by removing the band at the left end of the generator in the picture. There is information on the functioning and adjustment of third brush generators on the internet.
PHIL.HOOPERJul 17, 2025 The brushes are accessed by removing the band at the left end of the generator in the picture
What Phil said is correct but after you remove the band you need to loosen a little screw on the back so you can move the third brush then once done tighten the screw back up. At least that's how it is done on a 1932 Auburn.
Hello all together
Thank you for your help and informations. You are right, the third brush has to be set correctly. In order to solve the problem finally, i have sent the generator to a real specialist with more than 50 years experience in automotive generators. He set the third brush to the correct value and installed a working cut out relay. It is not the original Auburn part, but it works, so that the generator and the electric system is now working perfectly. Today we have made a tour of around 40 miles and had always between 6,5V and 7,4V in the system. ( never had that before) The car is now running great and we are happy ( of course).
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
