



One of the Auburn owners here in Australia told me not to use a product called Flash Lube which is a fuel additive lead replacement as it gummed up valves.
I didn't tell I had been using it for years in my Cord without any problems.
Have you been using any fuel additives?
Just a thought.
EricOthers have already posted pictures of the valve train. It is pretty simple and very little that can go wrong between the camshaft and the valve. Camshaft is very exposed to the oil being slung around by the crank and rods. I think you either you have a sticky valve or a misfire.On the subject of sticky valves, My 8-98 also has a tick ( lesser among more serious issues) . Having spent too much time reading the AACA forum, there is a theory that emerges that the sticky  valve issue on these flatheads is partially relalted to the 'dryness' of modern fuels. Some recommend Marvel Mystery oil, some recommend the addition of kerosene to each tank of fuel.Since I currently have the engine partially disassembled, I'll share an interesting observation that may relate to the ticking ( and likely stickiing) we are both experiencing.Ignoring the heavily sooted exhaust ports ( I think from prior owner's monthly start-ups and a definite misfire!). Not sure how well it shows up in the attached photos but  the first thing I noticed was the oil lying in the bottom of each intake port. What is interesting is that  it seems to be a heavier deposit at the front and progresses in a a fairly linear ( unscientifically determined!)  fashion to almost none at the back. The oil can only be coming from the valve guides .Why it's heavier at the front? Maybe the open port through front of the block to the timing case allows more oil 'mist' to be drawn up by the valves? Maybe the crankcase breather at the back tappet cover allows the 'mist to escape before it gets to #7 and 8?Interested in others takes on this? I might post this query on the AACA to see if there are similar issues noted with other marques.Brad



Happy to learn what the problem was and how you fixed it. Hopefully it wont come back later. But if it does you know how to fix and where the issues are.
 
 
Gary Parsons
If that valve stuck once it will probably stick again unless something changes. I've had good success warming up the engine, rev it up to about 1500 rpm and pour a pint of Marvel Mystery Oil down the carb - MAKE SURE YOU DO THIS OUTSIDE!!! Then put a pint of Marvel Mystery Oil in the gas tank. Lastly beat the car down the road! hard accelerations, hard deaccellerations and just run it hard. That tends to clean out the valve guides so the valve won't stick again.
 
I've done this on several engines and it always worked well.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.





.jpg.5a677b9d5f052de93074b2a2a25dc1de.webp)
.jpg.171031c636fc183159240de7078531fa.webp)