You need to remove the top trans. cover as I remember. Once you remove that it will be obvious how to remove the lever.
CORDially Mike
Y
· May 1, 2025
Yes you have to remove the transmission top. About 6 bolts. I put it in neutral before I take it apart. There are 2 plates under the cover with ball bearings in between try to keep that together so you don't loose the ball bearings. I believe the shifter is supposed to be slightly dull not high sheen chrome. Curt Schulze has a web page at midwest auburns that I think describes the finish.
· Oct 29, 2025
butler finish on the lever
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.