Shall do
Many thanks.
ItÔÇÖs a four.
I put a message in at AACA but no bites as yet.
ItÔÇÖs a 1927 Auburn 4/44. 4 cylinder 44 hp. I must say that I think the 44hp is a little optimistic..
Thanks for you concerns though.
Greatly appreciated
Hi Mr KellyI managed to spend a few hours on my car this weekend. I took the old cap off and polished it up and for better or worse tried to put some superglue in the crack. I the buffed it up and put it all back. Started the car. One shot of choke and she fires straight up. once again though engine runs rough and certainly can't pull away or drive drive down the road. A friend of mine said he once put WD40 in the cap and the car shot. So after struggling for nearly six months with this problem I squirted quite a bit of WD40 in the cap as I was so fed up with car and guess what. Runs like a dream. The cap was bone dry before so no moisture problems as far as I could see. I spent the rest of the afternoon refurbishing an old cap that I have which I thought was a lost cause. A friend from South Africa said I wish drill out the old price of carbon and insert a new price. So I did. I'll check it tomorrow. QUESTION. What gives with the WD40. Have you ever heard of this before?  Anyway. Your assistance was greatly appreciated, I did check out the cap but was too small. Photos to follow. Once again, thanks for the assistance.  
WD40 was made to displace moisture. It was the 40th time the makers found it works from different formulas. I recall it was invented in San Diego Ca and was originally a fish formula with ether fluid as the propellant. Not sure how its changed today but... It really displaces the moisture in things like distributor caps and ignition wires. Spray it on the spark plug wires and it will not ark shorting out the plugs causing a misfire.
 
 
Gary Parsons
Anthony, just read your post about the distributor cap. I have several of those available, NOS PM me if you are still looking or need the rotor or points
Tom
Hi Tom.
Thanks for the reply.
Yes, I'm definitely after one if you still have. I'll also be interested in the rotor.
I'm in the United Kingdom but if that's a problem I do have a friend in Tampa Florida you can post to.
Any idea on the price?
Once again, much appreciated
Anthony Stephenson
Anthony, I sent you a private email. Can ship to either UK or Florida.
Tom
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.







