What are you putting the pump on?
I have some pump parts and pumps for??
Pete
Hi, ┬áI will preface my response with the statement that I am in no way an expert on Auburns, Cords or AC fuel pumps. ┬áI have recently been digging into fuel pump information in order to fix a leak on the AC fuel pump on my Cord 812 phaeton. ┬áFrom my searching around the web and looking in my old MotorÔÇÖs manual it appears that AC made at least a couple of types of fuel pumps in the 30ÔÇÖs known as type B and type D. ┬áType B pumps have a 3 1/2 inch diaphragm with 6 screws holding the assembly together whereas the type D has a 4 inch diaphragm with 10 screws. ┬áYour pump appears to be a type B and I have seen a number of similar looking pumps for sale on E-Bay when I searched for ÔÇ£vintage AC fuel pumpsÔÇØ. ┬áIf your pump is indeed a type B it appears that there is a rebuild kit on EBay that may work for you listed by a seller named ÔÇ£Arizona Vintage PartsÔÇØ. ┬áThe seller indicates that the kit will fit 1930 Auburn fuel pumps. ┬áYou likely would want to contact them to confirm that the kit will work on your pump. ┬áI found the kit by searching for ÔÇ£AC fuel pump type B kitÔÇØ.
 
I hope that this is helpful.
Good luck.
Bill
 
 
[attachment=8040]IMG_4333.JPG[/attachment][attachment=8041]IMG_4334.JPG[/attachment][attachment=8042]IMG_4335.JPG[/attachment][attachment=8040]IMG_4333.JPG[/attachment][attachment=8041]IMG_4334.JPG[/attachment][attachment=8042]IMG_4335.JPG[/attachment]Is this the type of pump you require?
 
Thank you Pete, I was told the OEM was a AC 855650 series B
Hi, ┬áI will preface my response with the statement that I am in no way an expert on Auburns, Cords or AC fuel pumps. ┬áI have recently been digging into fuel pump information in order to fix a leak on the AC fuel pump on my Cord 812 phaeton. ┬áFrom my searching around the web and looking in my old MotorÔÇÖs manual it appears that AC made at least a couple of types of fuel pumps in the 30ÔÇÖs known as type B and type D. ┬áType B pumps have a 3 1/2 inch diaphragm with 6 screws holding the assembly together whereas the type D has a 4 inch diaphragm with 10 screws. ┬áYour pump appears to be a type B and I have seen a number of similar looking pumps for sale on E-Bay when I searched for ÔÇ£vintage AC fuel pumpsÔÇØ. ┬áIf your pump is indeed a type B it appears that there is a rebuild kit on EBay that may work for you listed by a seller named ÔÇ£Arizona Vintage PartsÔÇØ. ┬áThe seller indicates that the kit will fit 1930 Auburn fuel pumps. ┬áYou likely would want to contact them to confirm that the kit will work on your pump. ┬áI found the kit by searching for ÔÇ£AC fuel pump type B kitÔÇØ.┬á
I hope that this is helpful.
Good luck.
Bill 
 
 
Thank you Bill, I reached out to them via phone; they will confirm the correct kit I need.
I use "Then and Now Automotive" in MA. They have kits and also do quality restoration.
Ph: 781.335.8860
I use "Then and Now Automotive" in MA. They have kits and also do quality restoration.
Ph: 781.335.8860
Great idea Pat, thank you.

You can fix it it by making a new diaphragm out of Buna N sheet. Just use a scissors and a gasket punch set, use the old diaphragm as a pattern. Clean up all the other parts, make sure the valves are clean and operating. Is not hard or expensive. You can get the proper material here:
https://www.mcmaster.com/1890T12/
 
One sheet should last you through a lifetime of fuel pump repairs.
Just another opinion. I use Viton for gas applications.
CORDially Mike
Thank you, everyone, for your help on the rebuild. I have a bit of a Frankenstein fuel pump. The bottom half is correct for early '30's Auburns. The top half is correct for the late '30's Chevrolet. I ended up buying two different rebuild kits and used the parts from each. The proper pump is an 855650 series "B', and would have the glass bowl pointing toward the firewall, not as shown here, on top of the diaphragm. All back together now and working perfectly.
You can contact me plkelly@hurontel.on.ca
Pete Kelly
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.







