If you're car is original you will have a rectangular generator cut out on top of your generator. They didn't have a regulator but many people have replaced the cutout with a regulator. The generator does supply less amps at idle. Has the generator been serviced or rebuilt lately? 
Side comment: if you have the original cutout with the point style disconnect people have replaced the points with a diode because the points can stick an burn up your wiring. I think Curt Schulze posted a description of the process to do that.
I wouldn't change your pully size(unless you have the wrong pully yo begin with). Generators don't put anything out at idle so your amp meter will go to zero or negative. If your headlights are going very dim when you idle you have another issue. Your battery should be able to keep the headlights at full brightness when you are at idle.
 
I would start checking for other problems. My first guess would be a bad connection somewhere that is not allowing enough current to get to the headlights - check between the battery and the general electrical system, not the starting system.
 
Jim
Thanks for the information.
I will discuss this with my mechanic. He read that for Taxis and other commercial uses for the Auburn, changing the pully size was recommended. This might be for city driving only.
I can understand the different size pully for taxis that sit and idle for extended periods and mostly run at slower speeds. But not for out cars. 
 
I think you have other problems that you need to find. Otherwise the problems will eventually find you.
In the 50s and 60s we had the same overcharging problem especially on long trips. We just turned the head lights on even in daylight to draw down the battery.
 changing the pulley size to a smaller pulley will speed up the generator especially at idle. Going bigger will slow down the generator at idle. So changing the generator speed appears to me like a band aid approach repair. I am doing some generator re engineering and can't find a smaller pulley but most anything else I have made easily. As already posted it seems like maybe you have other unknown charging issues. 
 
Gary Parsons
 
In the 50s and 60s we had the same overcharging problem especially on long trips. We just turned the head lights on even in daylight to draw down the battery.
 changing the pulley size to a smaller pulley will speed up the generator especially at idle. Going bigger will slow down the generator at idle. So changing the generator speed appears to me like a band aid approach repair. I am doing some generator re engineering and can't find a smaller pulley but most anything else I have made easily. As already posted it seems like maybe you have other unknown charging issues. 
 
Gary Parsons
 
In the 50s and 60s we had the same overcharging problem especially on long trips. We just turned the head lights on even in daylight to draw down the battery.
 changing the pulley size to a smaller pulley will speed up the generator especially at idle. Going bigger will slow down the generator at idle. So changing the generator speed appears to me like a band aid approach repair. I am doing some generator re engineering and can't find a smaller pulley but most anything else I have made easily. As already posted it seems like maybe you have other unknown charging issues. 
 
Gary Parsons
 
In the 50s and 60s we had the same overcharging problem especially on long trips. We just turned the head lights on even in daylight to draw down the battery.
 changing the pulley size to a smaller pulley will speed up the generator especially at idle. Going bigger will slow down the generator at idle. So changing the generator speed appears to me like a band aid approach repair. I am doing some generator re engineering and can't find a smaller pulley but most anything else I have made easily. As already posted it seems like maybe you have other unknown charging issues. 
 
Gary Parsons
 
In the 50s and 60s we had the same overcharging problem especially on long trips. We just turned the head lights on even in daylight to draw down the battery.
 changing the pulley size to a smaller pulley will speed up the generator especially at idle. Going bigger will slow down the generator at idle. So changing the generator speed appears to me like a band aid approach repair. I am doing some generator re engineering and can't find a smaller pulley but most anything else I have made easily. As already posted it seems like maybe you have other unknown charging issues. 
 
Gary Parsons
 
In the 50s and 60s we had the same overcharging problem especially on long trips. We just turned the head lights on even in daylight to draw down the battery.
 changing the pulley size to a smaller pulley will speed up the generator especially at idle. Going bigger will slow down the generator at idle. So changing the generator speed appears to me like a band aid approach repair. I am doing some generator re engineering and can't find a smaller pulley but most anything else I have made easily. As already posted it seems like maybe you have other unknown charging issues. 
 
Gary Parsons
 
In the 50s and 60s we had the same overcharging problem especially on long trips. We just turned the head lights on even in daylight to draw down the battery.
 changing the pulley size to a smaller pulley will speed up the generator especially at idle. Going bigger will slow down the generator at idle. So changing the generator speed appears to me like a band aid approach repair. I am doing some generator re engineering and can't find a smaller pulley but most anything else I have made easily. As already posted it seems like maybe you have other unknown charging issues. 
 
Gary Parsons
 
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
