Did you ever get a reply to your question?
I am trying to get info on Auburn 8-100A which I have a mechanic friend working on. I think the camshaft moved one tooth when the timing went haywire. Any sugestions?
Donald
 
There wlll not be detailed information as one might find for a post-war car. The information supplied by Auburn was pretty basic!
You can buy the 1931 manual for service mechanics from the museum, the link is attached.
https://acdamstore.com/collections/literature/products/1931-auburn-manual-for-mechanics
 
Engines were basically the same for 1931-1933 .
My understanding is that they did not issue a separate service manual for 1932 , but , instead, issued service bulletins from 1931-1933. That is the second more expensive option from the museum but the bulletins are more of an addendum to the original 1931 manual.
The 1931 has basic info on setting the timing chain , camshaft bearing clearances, rod and main bearing clearances and piston clearances. Not much more than that!
 
Brad
Thanks for the reply. I do have the manuals.
It looks like I have lost compression on 7 & 8.
I ordered an adaptor for my compression checker (they are hard to find) to verify this. In the mean time I have ordered a head gasket ( I hope it's not more!) and made arrangements with a restoration shop to pick up the car and get the car running.
Brad,
Looks like lost compression on 7 & 8. I have ordered a compression gauge adapter to verify this and a new head gasket. In the mean time I have made arrangements with a repair shop for old cars to pick it up in a couple of weeks and hopefully get it going.
Thanks,
Don Phillips
This may be my third attempt to reply. Looks like low compression #7 and #8. Have ordered large compression tester adapter to verify and new head gasket. In the mean time have arranged for professional shop to work on car.
Thanks,
Don Phillips
Hi Don, If it happens to be valves don't let the shop put hardened seats in it. Likely
hit the water jacket with the machine work.
CORDially Mike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
