Steve, I think I have one in stock.
Send an email to : cschulze@centurytel.net
Steve , I jave a J10355 in stock. My emailaddress is:
cschulze@centurytel.net
Still looking for a quality gas tank filler neck grommet.
If you can't find one you could make a mould and have one cast in polyurethane. Talk to a plastics supplier.
I made my own steering column grommets for my 810 Cord.
It was a bit of work with a lathe but not impossible.
I will take some pictures of the mould I made.
Attached are some pictures of the mould.
I guess the mould for the fuel filler grommet would start with reproducing the body contour then working out from there.


Vivian Lavine might have one
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
