Dans2003
I would reccomend looking at a Cold Metal Repair--Metal Stitch Repair
In my business of repairing Old Cast Iron Reciprocating Compressors up to 1000 hp we were never able to weld old cast Iron -- Just did a Repair on a high pressure 750 psi by the Lock Stich method
 
I know a lot of old blocks that have been scraped because of poor casting from the 30s
Dans2003
I would reccomend looking at a Cold Metal Repair--Metal Stitch Repair
In my business of repairing Old Cast Iron Reciprocating Compressors up to 1000 hp we were never able to weld old cast Iron -- Just did a Repair on a high pressure 750 psi by the Lock Stich method
 
I know a lot of old blocks that have been scraped because of poor casting from the 30s
Valve seat though. Can't imagine JB weld holding up to compression heat.
CORDially Mike
Try calling Jay Lawson at 269-217-2604. He has a Auburn block, but he is unsure what year it is.
CORDially Mike
We were never able to weld old cast iron in my line of work, which is fixing ancient cast iron reciprocating compressors up to 1000 horsepower -- Just completed a repair using the Lock Stich technique on a high pressure 750 psi system.
 
 
Hi, I know of a motor from a 29 speedster that is available.  Please contact me for information.  Thanks Pat
616 863 9932
pfree3233@yahoo.com
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


