Justin,  I am hoping you get some better answers than mine.
 
I do not know about a V-12 core, though an 850/851/852 core in a honneycomb has to come out of England - Brassworks in California can get close, but no cigar.  If your radiator has already been recored once then perhaps just recore a second time (or see if it can be rodded our and/or backflushed .  I am thinking a brassworks raditor will be a substantial couple of thousand.  I local radiator shop recore with a more modern core should be under $1,500.   I would like to tell you honneycomb all the way, but unless showing car for points then I would not get too concerned one way or another.  I just put a new Brassworks radiator in a friends 1929 Packard 640 (with shipping both ways, it came just shy of 5K and work is IMPRESSIVE).
 
As a sidenote: A friend just did her radiator in her 1932 1750 Alfa Romeo and she is running about 30K (and will need to have paint matched and painting done to get job finished). And I have heard tale of some pre-war Mercedes radiators running 50K-ish.
 
As an add'l sidenote, the fellow who made the V-12 Brougham (that you see at ACD festival)  was having problems last year with overheating and I think we pinned that down to lower radiator hose collapse under acceleration (the hose did not have a spring in it) and/or he just does not have enough restriction via having a proper automobile V-12 thermostat housing doing everything it should be doing (ie coolant has to stay in a radiator for a certain amount of time and too slow or too fast of movement will cause overheating).   Where I stumbled into the spring issue in the lower hose was with my 1941 Cadillac - it overheated upon rebuilding the engine and turned out new hoses that were not as heavy matched to no spring - we caught the  issue running the car on a dyno.
HI Justin, It sound like the radiator core is plugged up. Try back flushing and having it boiled out.
 
I would recommend putting a filter in the radiator hose between the engine and the radiator. I have had several cars run along fine, even "clean" engines and all of the sudden puke a bunch of junk into the radiator and plug it. If you have a filter in the line it will catch all the junk and save the radiator. You can clean out the filter on the side of the road, refill the radiator and be back on the road in under 30 minutes (including cool down). I know , it happened to me this past weekend.
 
I hope to see you in Auburn this year!
Jim
Hi Randy,
Have not checked that. What's the best way to do so? What would the effect be if it was staying open?
Justin,
If the bypass is not closing, it will allow water to bypass the radiator
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
