Curt
Is there a good way to remove ones that are in place but rusted out?
I'm dealing with a lot of messed up ones where the screws go into to hold down the wood floor panels.
 
Thanks
MP
In most cases the flat side is what is available.
What should I watch out for on the flat side?
Thanks! I see what you mean about flat side.
I was confused.
Back to the D nuts.
What thread screw do the D nuts accept? Looks like 1/4-20, does that sound right and are they the same along the body frame for the wood floorboards?
Thanks in advance.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.