PR
@prattm
Replies (14)
P
Sorry, the car in question is an 851 cabriolet.
C
I have some, how many do you need ?
C
Craig, He showed durable dot fasteners. You show Lift-a-dot. Different animal.
Y
Yes all had dura dots along the seat back and a couple had 1 to 3 along outside from door post pack. The original question I think was some we saw had the front edge of boot attached on the top of the seat back edge and some were attached lower on seatback closer to top of package tray. Which is right?
C
The Durable dot fasteners are on the seat back.
The Lift-a-Dots are around the back of the tub. There are different lengths depending on the amount of top material .
P
So are the snaps that are shown on my photos not original snaps? If they are not, this would explain their being in a different place.
C
It appears that way. Craig, what do you think?
Y
Well the ones I can see well look like a flathead screw in duradot male side. So thats pretty early. Location of them still seems to vary. I have 1 original back of seat bracket ill check out and take a picture of tonight.
P
The flat head screw is actually part of the snap. It looks like they are made that way. I didn't know if this is an original snap. I admit the placement of the snaps on the original wood doesn't make sense.
P
Gets more confusing as it goes. Who knew snaps could be so hard to place.
Y
Mathew I am not sure which is right! There seem to be more with the lower snap position. I like the way the boot looks with higher snap position. For judging top needs to be up and boot just with car so at present I don't think it matters for judging. Also there seem to be varying opinions on the boot.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.






