HI Robbie,
THis is a very nice looking Speedster. To answer Some of your questions.
 
Yes the car can be checked for certification. The Pre-certification checks need to be done at a ACD CLub meet where we have a certification team present. Once the Pre-Certification checks are complete it takes at least another 6 to 12 months to complete the certification process.
 
The chassis number should be on the right frame rail at the very front near the two spring hanger bracket rivets.
 
There should also be a serial number plate either under teh cowl on the right side of the car on the firewall or on the floor board on the right side of the car in front of the seat.
 
Jim
Hello Jim
Thank you very much for your reply. I will pass the information on to the owner.
Mr Marenzi: I see your post about the 1928 Auburn in Buenos Aires.  I am trying to contact the family of the deceased Jose Matteazzi who restored the vehicle.  I purchased another item, unrelated to cars (a model ship engine), from them in 2008, but have lost contact.  I recall they told me at the time about the Auburn.  Can you connect me with the Auburn owner, or with the ACD chapter in Buenos Aires?  I am in Portland, Oregon, and my phone number is 503-775-5954.  Pat Spurlock 
 
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
