I tried using a large "0" ring to take up the space and it didn't stay in position. Then I used something else but don't remember what it was. Maybe RTV. Curt is right, your thermostat housing looks very corroded. That is usually a sign of what the interior of the head looks like. If you aren't going to remove the head now I would buy one and have it ready for the future.
CORDiallyMike
Agreed. Machining this for a snug fit wont change whats happening internally to your head. Sorry but it appears to be new head time..
 
 
Gary Parsons
When I bought my speedster , I quickly found out that the car had been in a horiffic accident. it had struck a tree at a high rate of speed which drove the engine back thru the firewall. A fire ensued. The car was left outside for many years. A fellow found the car and put a convensional frame under it, a cowl from a cabriolet or phaeton and a non s/c engine. This all went well for him untill he tried to mount the manifolds. The project stopped there.
I found a speedster frame , cowl and a s/c engine. I am told the car will not certify. So I didn't try. I recieved a first junior and a second senior, because of a points deduct of not being certified.
Curt,
Let's have a talk in Auburn about certification. Also as far as I know judging has never deducted points because a car is not certified.
Jim
Pwestphal - if you want to have the pre-certification checks done at Auburn this year please contact me to set up an appointment on Friday. My number is in the Reunion forms and schedule. The schedule is filling up.
 
yorkgulch - The certification process and criteria are well defined. Please look back at the articles I wrote in the Newsletter a few years ago, everything is explained there.
Is the block clean on the inside. Your 852 probably doesn't have a water side cover, as those were only on early 35's. Could be crud in the bottom of each water jacket around the cyl. Some times it can be quite high in the jacket. only dislodged be use of a wire etc.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


