I have a 31 8-98 coupe. Don supplied the head pipe and the tailpipe .
Frank the cutout and muffler. Both went together with out any alterations.
But no one says it was quick or easy.
Hey Curt
 
Agreed, not easy. Good thing I haven't progressed far enough to have the body mounted to the frame and was able to attack it form the top. As I'm sure you found out, the tailpipe clearance through the x-frame cutout is almost negligible which has me thinking the the original pipe might have been 1 5/8" which would fit the original muffler outlet I have. On the other hand, they might have simply swaged the end of a 1 3/4" pipe. I'd ask you to go check on the original sedan you have but that would likely be a week's worth of exercise for a 'nice to know' instead of a 'need to know'!
 
 
Brad
I checked my original cutout muffler and the outlet is about 1 5/8". I recall I used 1 of Frank's cut out mufflers and it fit perfectly with no modification of anything. The tailpipe went over the outlet so could have been 1 5/8" swaged to fit over or 1 3/4" pipe.
Pete
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
