Like I said, the smaller of the two bows matches an outline I had around from an actual Auburn so I'm pretty sure it is valid. The larger bow, even if authentic is rather beat up and rotting. I have some top metal parts I will post later, maybe someone can post pictures after that of the pieces in place and what is used for the B-pillar. I'm sure the mechanism must bolt or hinge there.
Thanks!
Curt
I checked every page of the 34 Parts book and mine does not have a blow up of the top. I did get this from the museum, but it was quite awhile back, it's not even bound like the prints they sell now.
 
 
If possible, can someone scan that diagram and make a pdf of it? It will probably answer a lot more questions...if not create new ones.
 
Matthew Pratt
send me an email, I'll send one to you.
cschulze@centurytel.net
Here are the other top parts that I have. Note on the second photo the threaded area with the red lines going to it. What does this attach to in the shelf area in back? Does it just go through a wood piece with a hole in it, or is it into a metal part mounted to the wood structure in some way? If anyone has photos of a cabriolet in the restoration phase that shows the wood work, please let me know.Thanks in advance!MP
Curt
I will purchase those two pieces from you, definitely! (G3990RH ? G3991LH)
I'm also putting together a list of parts for the top I need.
Thanks
MP
Thank you for that wood support structure picture! That is exactly what I was look for.
Is the area painted red at the top of the horizontal wood (between the two vertical pieces) covered in metal?
Any other photos you might have of your restoration would be a great help too
 
Thanks!
MP
I will be emailing you today, thanks!
 
MP
Another question.I have to recreate most of the internal wood structure, and I've started at the B-pillar or where the door hinges mount. On the metal cap that goes over the wood upright there is a bump out at the bottom, but non of the old upright wood parts have this bump out on them. Is this supposed to be hollow, or have all the wood parts just happen to be rotted away in this area. The thing that makes me question rot is the fact that all the wood surface is still black as it was painted.Thanks in advanceMatthew Pratt
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.











