It might be easier to post pictures of your chassis and let people comment on wrong details.
CORDiallyMike
Mike I agree, but I am also looking for pictures for adding the missing parts as well. Currently from the firewall forward is completely off. (not by my doing, that's how it came) I'm currently still trying to find all the bolts hold the firewall back (body and all) to the frame. There is considerable rust both in the body and rails and the frame itself. I'm trying not to destroy something I may need later, even if it's just to duplicate it.
 
Thanks
Matthew Pratt
I don't see the rear engine mounting brackets. I have one bracket that I can offer to you, no charge.
Otherwise, the frame appears to be OK. If you remove the air-deflector in front, I can determine if all is well.
Both rear engine mounts are there. I'm trying to remove the air deflector (didn't know what it was), but right now 5 screws are standing in my way. It's actually a coupe, but like I said, from the firewall back it just gets worse. As soon as I figure out how many bolts are left holding what's left of the body on, I'll take some pictures of the rear.
I would say that everything is OK from the firewall on forward. If you can jack up the car and take some pix of the underside, that would be helpful.
Perhaps you are looking at the body sheetmetal framework: That would be an easy fix...
What makes you think that the frame is bad? Are there parts cut off with a torch?
Thank you very much rlwardne that helps a lot!ilikescars I know there are parts of the rear frame, especially right in front of the rear axel that will need to be replaced (cut out and weld new pieces back in).I'll try and get some pictures later today. The other problem I have is they welded the rear fenders into the body. I assume they did this because the bolt point in the wheel well are pretty rusted out. I think most of this was done in the late 50's early 60's. That's just a guess.On a topic related to the pictures rlwardne sent. What is the deal with shock absorbers? I see some 35's with them, and others with what is shown in the recent pictures. I know the ones on my car are mounted incorrectly, but what is shown in the pictures by rlwardne?Thanks in advanceMatthew Pratt 
Thanks yorkgulch, I have some of those book pictures. That's why it was confusing me to see the other type of shock system. I'm just trying to figure out what was done to the car before we got it. For some reason, I still can't figure out why, they chopped into the fender support right below the bolt holding on the shock that is there. I can only imagine that they tried mounting a shorter one by creating a lower hole. Then later is appears they made a spacer to bring it to correct height. I will be removing the spacer and installing the correct length shock.
I promise, I have tons more questions coming.
 
Thanks
I believe they are. No body was
Offering up any pics so I posted
ones you had sent me a few years back.
Curt
That's why I'm here asking questions and requesting pictures. I have an early 35, so I'm not entirely sure what is and what is not legit on my car. As you can tell, someone had their way with cutting and creating. You should see what they did to all the fenders. Plus, they cut the running board brackets off with a saw, and I'm being generous with the term cut. They look chewed on.
This is some great information to have. Any chance there is the same information for the 36 or 37 Cords??? I can dream...
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.














