Pistons were hard to get way before COVID.
CORDiallyMike
Two years ago I bought a standard set of 810 Cord pistons fromEGGE.
They turned out to be super high compression pistons as the gudgeon pin holes had been drilled 1/4" too low. The machine operator took the wrong reference point. No apologies busines as usual send them back and a new set will be sent out. Second set had loose gugeons. No apologies business as usual send them back we can supply oversize gudgeon pins.
EGGE's quality control is non existant.
Keep in mind I live in Australia and the engine rebuild program disappeared.
My last set of pistons were Arias - should not be an issue - DO NOT MONKEY WITH COMPRESSION OR .... AND JUST GET OFF THE SHELF.
 
Sorry, though I doubt you can get an engine done for less than the 14K - 15K with anyone specialized and a general rebuilder will be a chunk of change too. And, even more if block casting issues - which are common.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
