Yes there is a piece missing. I have my Startix opened and will post a picture of it tomorrow.
 
 
Gary Parsons
Sorry but my Startix has been playing hide n seek with me. At this time I can't post a picture but... you can search my posts. I know I showed how to take apart and restore these. You are missing that lever arm.
 
 
Gary Parsons
Hi Gary, Looked at your pictures and the missing piece is still hiding below the spring!!! If your startix turns up might you be able to get a picture if the lost piece please. I was thinking the piece might clip onto the solenoid shaft but in your picture it appears that it might rivet onto the swing arm with a roller that engages in the slot on the solenoid shaft?
In my pictures the lever is riding on the post and it not riveted to anything. Under the plunger there is a very small pin that rides in the plunger brass rings. Good news for you.... I looked once again very closely at your original picture. Your NOT missing the bracket. Its just not riding in the two brass ringed area on the plunger. Now you have to take the plunger and solenoid out to once again get the lever back in the solenoid plunger two brass ringed area.
 
 
Gary Parsons
Hi Gary, Here is my picture. My lever is on the post and pivots correctly. The pin that connects it to the groove on the solenoid shaft is missing. I have latched the lever onto the brass latch by hand. There is no connection to the groove in the solenoid shaft. I am assuming that there is a pin or stirrup of some sorts that connects these two? Thank you. Allen
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



