Get the serial number of the car and call Auburn tech and history guys in the Club and ask questions. Don't ever trust what a auction Co. or owner tells you. Might be correct but it is up to you to verify. Don't buy sight unseen.
CORDiallyMike.
All bets are off if it is new data plate.
CORDiallyMike
All bets are off if it is new data plate.
CORDiallyMike
 
Mike I agree and disagree at the same time with this statement. If the seller can show you the original data plate but they have a new plate on the car. I see nothing wrong with that.. But you make a great point. A new data plate would cause me to suspect something too. I keep my Cord data plate far away with my car as its being restored. To my best knowledge only two club members have ever seen it.That would be Henry Portz and Randy Ema. Both were here looking at my car some time back. I traded Henry parts for parts.Now I wish I had those traded parts back.... That was nearly 40 years ago. Randy was just curious and I appreciate that...
 
 
Gary Parsons
The car has 4 over-sized tires on the ground (they help a lot in looks though as original sized tires were a little on small side), but yet the side-mount tires are probably original size and mis-matched in tire brand (probably needs 2 Bedford tires for sidemounts). When friends and I restored the 1931 Phaeton, we actually enlarged the side-mount fender well so the car could take an oversized tire (but I think we still only went up 1/2 inch verses a whole inch in width - ex- like a 6:00 x 18 to a 6:50 x 18 verses a 7:00 or 7:50 - or somthing like that as it was 1980's when we restored the Silver/Black one that show up at ACD Festival regularly). Also has great looking wheels, but I believe the option was all chrome verses partial chrome.
 
The luggage trunk is period correct, but not what I would consider a style generally accepted for an Auburn of era.
 
The seats were not pleated like that, they were pleated, but also had a bolster. Strikes me as a few other misplaced seams, but also that needs your homework. And, I do believe vinyl on door panels and leather on seats and door pockets is correct.
 
We did not have any exposed top snaps either and we had a chrome in welt bead up the C-Pillar.
 
I am not sure a numbers matching engine is as critical on a 31-33 Phaeton, but certainly is on a 1935-36 open car or a boattail speedster of any year, but obviously if it has one then all the better.
 
Also, do your homework as to if a correct carburetor or not - sorry it has been too long and had the right one so I never paid attention much, but you want the right thing.
 
Car is not pinstriped yet.
 
Overall - VERY NICE AUTOMOBILE and great "LOOKS"
Randy was just curious and I appreciate that...
 
Sidenote: Randy keeps a data base of serial numbers and is an incredible source of information about a cars history - always worth shooting him a quick note when buying an expensive car.
 
 
Gary Parsons
Chrome wire wheels are not really a problem - a good wire wheel restoration company (such as Dayton Wire Wheel - which has been making wire wheels since the beginning of wire wheels) will replace spokes with stainless and ...
 
Where people get into problems is "penny pinching" or they expect junk to be restored to perfection (you need a pretty nice wheel to start with to chrome/re-chrome) and for example Duesenberg owners have been know to have problems via restoring their wire wheels multiple times and expecting perfection to win at shows (ie you cannot grind the rims down to nothing, re-plate time and time again, and ...). Also, replacement rims and reproduction lock rings (and sometimes whole reproduction wheels) over time have unfortunately had metallurgy issues too.
"Happy happy "
And so you should be!!!
That is a fine looking car.
Pete
Very nice lines on the car and the lights work , a good sign, Congratulations. Hope to see you at Club events. If you have not joined , please do so. It will be to your advantage.
CORDiallyMike
I was planning on attending the West Coast meet, but sadly it was canceled a second time.
I paid my dues and got my card a couple months ago...
Is there some clandestine initiation or grueling hazing I need to undergo to be official?
If you are on the west coast Randy is the leader of the HAZING SQUAD.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


