"GOOD" plating shops can handle that kind of work. Have the shop plate it also, so all the responsibility is on one shop.
CORDiallyMike
Contact a top end restoration shop in your area and see who they use.
CORDiallyMike
I wish I could describe some obscure and mysterious fix but truth be told, I got in touch with Denny Akers here in the Seattle area and Denny put me in touch with a fellow who understood the problem immediately and had the experience to accomplish the fix. In a nutshell, he drilled a small hole at the interior end of the fissure and then rewelded the fissure.
During the course of the restoration of my 8-105, I've had the pleasure to come in touch with a number of older people with years of experience with obscure problems. Most of these fixes are not accomplished overnight--for them, time is not measured by sweep hand on the clock, so patience is required.
If anyone in the Northwest needs help, call me and I'll be happy to connect you with an old-timer with whom I've become acquainted.
I wish I could describe some obscure and mysterious fix but truth be told, I got in touch with Denny Akers here in the Seattle area and Denny put me in touch with a fellow who understood the problem immediately and had the experience to accomplish the fix. In a nutshell, he drilled a small hole at the interior end of the fissure and then rewelded the fissure.
During the course of the restoration of my 8-105, I've had the pleasure to come in touch with a number of older people with years of experience with obscure problems. Most of these fixes are not accomplished overnight--for them, time is not measured by sweep hand on the clock, so patience is required.
If anyone in the Northwest needs help, call me and I'll be happy to connect you with an old-timer with whom I've become acquainted.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
