1932 or 33 Auburn phaeton
Has wrong hood and rad shell
Thank you very much , are the parts available for restoration? Is a car in this condition worth restoring?
Are they replica parts available?
I have done several restorations, but all of them of very common cars, like Fords Model A.... I lack knowledge in Auburn (pardon my English, I am in Mexico and From Mexico)
Parts will be difficult to find. The vehicle as shown in the photos is pretty incomplete. In addtion to Pete's comment, the headlight bar is incorrect and the rear wheel shows a five bolt wheel so the rear axle is likely incorrect as well making the frame and running gear suspect. There doesn't appear to be any transmission or engine. I'm not sure if your dad has a stash of parts somewhere but if he doesn't I would say it is beyond restoring. If you have more parts , post some photos and we can let you know if you have the right stuff.
 
The sheet metal appears to be in good shape and is definitely worth something. There will be interest in that.
 
Brad
He has 3/4 of the motor in parts and the transmission. No papers, and I looked for the VIN plates and numbers and I cant find them anywhere except for some numbers that seem to just part numbers that are not VIN related.I agree , this car must be beyond restoration to its original glory... but maybe If I could just get enough parts to do a Restomod, (not a hot rod), but a car with modern confort with old looks..... Are there enough replica parts to complete the exterior? Where do you guys suggest I could buy or look for the exterior parts to complete a Restomod build for this? Are there Auburn Restomods out there? I might be commiting blasphemy with this, but I am in love with the looks of Auburns..... Very Underrated brand! 
Why was 1931 ruled out as a potential year for this car ? Body style is 1931, 1932, and 1933
 
And, Hood and Radiator Shell are incorrect, as are wheels (which in this case also would equate to incorrect axles too).
Rear axle is probably not Auburn unless 34-36
Gauge cluster is obviously 32-33
Body would fit 31-33 but not salon
John
 
To be specific on Pete's comment, the two speed rear end control in the center of the gauge cluster is 32 --33. The body itself would work from 31-33.
 
GPOHLS
If you have the correct frame , the frame number will be stamped on the outside of the right front frame rail over the right front spring hanger. It can be hard to find due to light stamping .
The VIN plate is nailed to the top of the right wooden sill by the front seat. They usually go missing .
The numbers you are showing are part numbers .
I've messaged you with where to find the body number ( not the VIN but close!)
 
Brad
Its definitely missing the VIN plate, I talked to my dad who told me some of the background story of the car, originally from a very wealthy miner mogul, who gave it away to a servant, who couldnt keep up with the proper mainatenance and had the car stalled..... He was always told not to tamper by adapting stuff to it . The car went to storage inside a mine where it was heavily burglarized and later sold as is in what ever was left to my dad 40 years ago and been stored ever since.
My dad lightly did some body work 35 years ago just to keep it from the elements until he had the time, chance to do this proyect..... He never got around, as there was always a more important or less complicated car do. But he is very old school, his old Ford, Cadillac and Dodge restoration contacts have all died and he in his 80s is no longer interested in stuff.... he is more into traveling when his condition allows. Can someone point me out where is a good place to start looking for body parts to at least complete the shell to consider a Restomod ?
Thanks
Parts are available, but it takes money and TIME.
I started with a car in similar to worse condition, it's been about six years for me to get it where it is decent to drive.
Neat car, see if any of the top bows exist.
Yes, eBay, Hemmings, AACA forums, this board, and being a member of the ACD club.
Also the ACD company in broken arrow, OK
Many of the people who have these parts are older and not "online" as you might expect.
You can send me a PM , I can give you my number
RE: Yes, eBay, Hemmings, AACA forums, this board, and being a member of the ACD club.
Also the ACD company in broken arrow, OK
Many of the people who have these parts are older and not "online" as you might expect.
You can send me a PM , I can give you my number
 
My reply, is hate to say it, but any way around it with a project you will have to learn your car and meet people in club - which is fun as a great club. This is not a car you get on the internet or go to the auto parts store to buy parts from a catalog.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

