Thanks Randy. Do you have any pictures of what one of the baffles look like? I'm wondering if I can fabricate a baffle out of stainless steel sheet. I assume the goal his to get the water to flow around the back of each cylinder wall and back out.
 
Regarding the screws, all of them or nearly all of them broke. He's going to drill them out and install heli-coils.
 
Bruce
Randy, I counted 17 broken bolts still in the block.
 
 
Gary Parsons
John, just to make sure we're talking about the same shop, it's Ron's Machine Shop in Shandon, Ohio (near Hamilton, OH) NW of Cincinnati. This is my first experience with them. Very nice people who seem to know what they are doing. But just don't be in a hurry to get your engine back because you're in for a long wait.
 
Anyway, if anyone has an example picture of what one of these baffles looks like, I'd really appreciate it.
 
Thanks,
Bruce
Randy,
Thank you for checking on that. Lycoming drawings? Wow! Not that I really need them, but are those publicly available to guys like me? All I have is an illustrated parts manual for 1930 Auburns. It shows some engine parts but not all. Mine is a 1929 and the parts manual isn't illustrated.
 
Bruce Wolfe
I have info. on L-29 water side cover that I will share with you. Very similar water side cover, just longer. Give me a address and I will send it.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
