You should be able to find a six volt solenoid pump thru your parts supply house that puts out around 3psi. If itÔÇÖs a
Backup to the stock
Pump these will flow thru to the stock pump. Some will not let you draw they them
I have seven Auburns 31-36 6, 8 & S/C I run a pulse pump through the original mechanical pump with a new diaphragm that is not sensitive to alcohol.
If you are interested send me a PM with your number, I'll give you a call.
I want to back up the mechanical fuel pump on a 1936 Supercharged car so I would need to know what is exactly the original factory PSI spec on it. I've read somewhere that I will be able to run a 12 volts electric pump at 6 volts so it will be easier to find a near perfect match' date=' unless you have a company name and part number that would work just fine for this application. Thanks.[/quote'] 
I would be buying a low pressure 6 Volt Fuel Pump. You can run 12 volt pumps on 6 (at least some of them), but it is a crapshoot as to what your results will be as to PSI. 
Consider something like this: https://www.macsautoparts.com/ford_mercury_early/electric-fuel-pump-6-volt-2-4-lbs-pressure-top-quality-carter-brand-with-in-line-filter-ford-and-mercury.html
All I see in the Auburn literature is an adequate supply to the carburetor. We checked a pump on one of the cars and it was around 3 psi.
The real governing factor is if you have too much pressure it will overcome the needle and seat and flooding will occur.
Those pulse or solenoid pumps are available in the under 5 psi range
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
