On my 35 I used the outer original seal flange and found a od. seal that fit that and didn't have to make a adapter ring.
CORDiallyMike
I welded one modern seal onto another as each had the correct outer and inner diameter needed for the pinion seal.
For the axle seals, I cut out and glued one modern seal with correct Inner diameter onto that square plate at the brake plate.
 
It still leaked and I found out later that there is a build- up of air pressure in the differential case, which pushes the oil pass the seals.
The difference between day and night temperature is enough to have air push oil and leak when parked.
 
This is entirely solved by drilling one tiny pin hole on top the differential case, to let the air pressure out.
The location of the hole is somewhere in the middle of the slope, between the oval center of the differential case and where the case becomes a tube, to avoid the middle area where the ring gear slashes the oil around
 
If oil leaks are your issue, and by leaks I mean those line marks at the tires, but not major dripping of oil, you may want to try the hole approach first.
 
My car is also a 1932 8-100 with the dual speed
A air vent is needed. I vented mine also but a different way. Used a brass sintered metal vent with a pipe tread into the top plug in dif.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
