I believe your missing a special bolt and a brass fitting. The bolt has a hole drilled in it so fluid can travel into the brass fitting. Then it goes to the front and rear brakes.. On the 1937 cord ebay listing is the brass fitting found on my 37 cord. You may need the same piece but Auburns are not my base. Hopefully others can explain.
 
 
Gary Parsons
Thanks for the pictures, it gave me a good starting point.
 
I looked again and I found my original bolt and it was a Banjo Bolt similar to the one on the 37 Cord but I did not find my Banjo Fitting Block.
 
I figured out my Banjo bolt is 1/2 20 so I did some searching and I came across a Vintage Golf Cart site that seems to have what I need. At least I hope so because I just ordered $40 worth of parts 🙂
 
I am hopeful that between all of these parts I will be able to make something work. Will keep you posted.
 
https://www.vintagegolfcartparts.com/Category/club_car_brakes_master_cylinder
 
https://www.vintagegolfcartparts.com/media/ecom/prodsm/BK465.jpg[/img]
https://www.vintagegolfcartparts.com/media/ecom/prodsm/BK467-2.jpg[/img]
https://www.vintagegolfcartparts.com/media/ecom/prodsm/BK460-2.jpg[/img]
https://www.vintagegolfcartparts.com/media/ecom/prodsm/BK461.jpg[/img]
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.





