I have Diamond Back tires on my Speedster, but not the Auburn tire. They were not available when I bought mine. I have run these tires tubeless for 55,000 miles with no problems. I am not the only one that does not use tubes on 35-36 Auburns. Just a thought for you.
CORDiallyMike
Roger: I just purchased a set of Auburn tires for a sedan project I'm having done. Unfortunately, I won't know their performance until the car is on the road late next year. I can get back to you at that time
Mark
I was also interested in the Auburn tires and would like to run tubeless. Mike would you share how you successfully seal the rim on this or a new thread?
Craig
This happened on the way home from ACD Festival 2017 (not fun and lucky it was a rear wheel). Coker brand radial. Several flats over 10 years (most in garage after coming back from this or that) - the issue seemed to be an aggressive ribbed pattern on inside of casing basically wearing into tube (a well talced tube and casing too). By the way, all things considered probably not bad service given 10 years and probably about 9K miles, but .... What I objected to more so on the day to day was "thumping" /"out-of-round" (had to replace one via it had so much weight on it and still .... and replacement was better, but ...., other 3 were fine).
John,
May I ask why you've not used tubes?
Do you know if the new 700/16R Diamondback Auburn Whitewall Radials are Toyos or designed to be tubeless? The supplier says they are designed for tubes but I'm suspicious.
 
Sorry, I do not have the answer, though I find people at Diamondback to be very knowledgeable. I like the look of the new Auburn Radial tire, but at the time they were not offering a 650 x 16, so we went with the Toyo tire (upon Mike Huffman's recommendation).
I just put a dab of silicone calk on each spoke for assurance. Since the spokes are welded I'm not sure that would be needed. The inside of my wheels were excellent, no rust.
CORDiallyMike
Sidenote: Diamondback offers two solutions:
1. A Toyo tire or "X brand tire of some sort" with a whitewall applied (you may run these tubeless).
2. The Auburn Radial Tire - I have no clue if you can run tubeless or not (call someone at Diamondback and spend some time with them on the phone).
 
And, worthwhile asking if they will be making a 6:50 X 16 (which they should have made in the first place as I do not know who advised them, though not all that much stuff uses 7:00 x 16 compared to popularity of 6:50 x 16 size across multiple automotive manufacturers).
When I say welded I mean the spokes are welded in verse. removable spokes. 1935/36 Speedsters should have welded spoke 16" wheels. You can tell this without looking inside of rim. There should be no nipples on the spokes. Otherwise no way to adjust the spokes.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

