If it is driving okay I would not worry about it. If you feel it is not original post a photo.
C
· Jul 22, 2018
My 32 eight cyl. is straight
T
· Jul 23, 2018
That is what I though. I'm going to fix it. I'm going through the front and rear end of my car to make things perfect as new.., This car was restored in the 90's and I have far more resources to make it right.
Thank you for your help
D
· Jul 23, 2018
Curt, Look at that photo with the car on it's side in the dealer showroom. It shows the drag link really well. It does have a bend to it. Dave
C
· Jul 23, 2018
That may be, but my 19,300 mile 32 that has never had a collision is arrow straight. . The 31 will be home at the end of the week, I'll check that out. I'll be out of town for the next three days.
T
· Jul 23, 2018
I posted a picture of my Link. It looks like the tire was rubbing on it. What limits the steering for going this far? Or did it originally have smaller tires on it with the wood spoke wheels? The plot thickens.
D
· Jul 23, 2018
The backing plates have stop screws to limit the spindle travel. Part #
SZ652 Front axle steering arm stop screw
NF6 Front axle steering arm stop screw lock nut
D
· Jul 23, 2018
Your drag link looks like it has a slight "S" bend to it. I wonder if drag links were bent as an adjustment for the movable steering box.
C
· Jul 26, 2018
I hate to say this, but I stand corrected. There is a slight bend right about in the middle.
C
· Jul 26, 2018
drag link
T
· Jul 28, 2018
I believe you are right . Mine is a bit more curved. I'm going to let it be. Thank you
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.